Reference: 1282
Spring idle screw on carburettor DELLORTO PHBG, PHBE, PHBH, PHBL ...
Ideal for lost or just for a refurbishment without spending too much.
Banner
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!