Reference: 2707
only idle screw for carburettor DELLORTO PHBG
The idle screw without its spring for your PHBG!
Banner
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 129517
The only wealth screws for your PHBG!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 8431
tank gasket for GURTNER carburetor.