Reference: 53016_00 / B53016B
Carburetor clamp kit DELLORTO PHBG and SHBC rigid
Kit of complete collar for rigid carburettor PHBG and SHBC!
Banner
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 8431
tank gasket for GURTNER carburetor.