Reference: 493928
TEKNIX tank for carburetor on scooter Kymco Dink, Vivality and Peugeot Speedfight, Trekker, Buxy ...
A very aesthetic tank delivered with its seal and screws for a very good price!
Banner
Ideal in case of wear, loss, ... Here the choke valve for carburettor DELLORTO PHBG choke cable only, for the proper functioning of the starter system during engine start. Excellent quality, delivered with the unit. This is the room in which clings to choke cable!
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 8431
tank gasket for GURTNER carburetor.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!