Reference: 02838_00
Needle for carburettor DELLORTO PHBG, PHBG Racing, SHA
Ideal in case of problem, breakage or loss of your old part!
Price
€4.16
Shipping in 1-3 days
Shipping in 1-3 days
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
carburettor pilot screw spring DELLORTO PHBG, PHM ...
1280
Ideal for refurbishment or for loss.
Description
Here is the spring of the pilot screw on carburettor DELLORTO PHBG, PHM .... Ideal for refurbishing after loss or wear that little spring that is required for proper operation and adjustment on your carburetor (this spring allows the support of the O-ring seal, and the continued tension screws for not to lose). Has sold the unit.
Internal diameter of the spring: 4mm
External diameter of the spring: 6mm
Spring length: 11mm maximum uncompressed and compressed 5,10mm
Product Details
1280
20 Items
New product
16 other products in the same category:
Reference: 1285
Gasket for carburettor DELLORTO PHBG
Ideal in case of leakage for a good quality repair at low price.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 473464
Transparent tank TUN 'R for carburettor DELLORTO PHBG and PHBD with screw and seal
A very aesthetic tank delivered with its seal and screws for a very good price!
Price
€14.16
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 1298
carburetor for cable choke valve DELLORTO PHBG
The little room in which hangs the starter cable.
Price
€3.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 4477.62
Reduction ring Ø24mm for DELLORTO PHBG carburettor
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53016_00 / B53016B
Carburetor clamp kit DELLORTO PHBG and SHBC rigid
Kit of complete collar for rigid carburettor PHBG and SHBC!
Price
€5.41
Regular price
€10.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 506272
TEKNIX carburettor
Excellent in the event of a problem or leak from your carburetor.
Price
€8.33
Ships in 1-3 days
Ships in 1-3 days
Reference: AP8106790
Tulip / adapter enhancement APRILIA Ø42mm threaded X Ø60mm
A tulip that increases the venturi effect therefore the performance of your engine.
Price
€8.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53027_00
Complete idle screw for DELLORTO PHBG carburettor
The idle screw with its spring for your PHBG carburettors!
Price
€5.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09450
Carburetor float 4 grams PHBG, PHBD
The replacement float for your carbs, ideal in the event of a fuel leak!
Price
€20.83
At your place in 2 to 5 days
At your place in 2 to 5 days
Reference: 493928
TEKNIX tank for carburetor on scooter Kymco Dink, Vivality and Peugeot Speedfight, Trekker, Buxy ...
A very aesthetic tank delivered with its seal and screws for a very good price!
Price
€6.66
Attention, may require a delay of more than 20 days!
Attention, may require a delay of more than 20 days!
Reference: 11540
Complete repair kit for PHBG carburettor by SACIM
Excellent in the event of a problem or a leak in your carburetor.
Price
€8.33
At home in 2 to 5 days
At home in 2 to 5 days
Reference: 1297
choke spring on carburettor DELLORTO PHBG, PHBE, PHBH, PHBL ...
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Price
€0.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53129_00
40mm 120 ° angled tube kit for DELLORTO carburettor
Ideal in case of loss or to pass your cable as desired.
Price
€10.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09811_00
Aluminum tank for cap on carburettor DELLORTO PHBG and PHBD
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
In stock
Reference: 4224-82
Tulip / venturi improvement adapter DELLORTO Ø32mm threaded X Ø40mm for PHBG
A tulip which increases the venturi effect therefore the efficiency of your engine.
Price
€8.33
Shipping in 1-3 days
Shipping in 1-3 days
Ideal for refurbishment or for loss.