Reference: 30 3339
Transparent MALOSSI tank with cap for DELLORTO PHBG and PHBD carburettor
A quality transparent tank with plug for PHBG and PHBD carburettor.
Banner
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 30 5471
A quality transparent tank for DELLORTO SHA carburetors!
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.