Reference: 10 5397B
Cap for MALOSSI transparent PHBG tank with seal
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Banner
Transparent MALOSSI tank for all PHBG & PHBD carburettors, this tank has a drain and main jet change plug, so you can change your jet in a very short time with a simple flat screwdriver. It is delivered with the cap, the cap O-ring but without tank gasket or tank screws.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.