Reference: 26 4189
Kit tube 40mm bent 90 ° for carburettor MALOSSI
Ideal for lost or modify the passage of your cable.
Banner
If you want to embellish your PHBG with a racing touch while making the jet settings more practical (you just have to remove the cap and tilt the carburetor to change the jet .. Without removing the tank). Here is the machined brass tank cap from Dellorto is reserved for Dellorto PHBG carburettors equipped with aluminum tank. The tank is also on sale here, the cap gasket not being separately, you will have to buy the complete PHBG gasket pack also on sale here.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!