Reference: 09779_00
Tank bottom cup on carburettor DELLORTO PHBG and others (small principal jet) not deep model
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Banner
Bowl cup bottom (anti-emulsion washer) for small pitch nozzle of 5mm. Fits between the needle well and the nozzle. Despite the rumors and some say, this is by no means a bridle. Rather a part that allows better mixing of oil / petrol (when it arrives in the tank), which avoids air bubbles and emulsions ... For DELLORTO, PHBG, PHBG racing edition carburetors ... Deep model (also available in not deep model).
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!