Reference: 129514
Gasket for valve cover for carburettor DELLORTO PHBG
For a refurbishment at a lower cost for a perfect seal.
Banner
Complete tube kit, length 40mm excluding thread, 90 ° angle. For accelerator or choke cables on DELLORTO SHA carburettor. Can be mounted on all DELLORTO models with standard thread! Delivered as presented with lock nut, tube, rubber, threaded length adjustment tube.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 129517
The only wealth screws for your PHBG!
Reference: 213458
A necessary part for the proper functioning of your carburetor.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 8431
tank gasket for GURTNER carburetor.