Reference: 14958_00
Plastic bushel spring sleeve for DELLORTO PHBG and PHVB carburettor
Ideal in case of loss or breakage of your old support, bushel socket.
Banner
Complete tube kit, length 40mm excluding thread, 90 ° angle. For accelerator or choke cables on DELLORTO SHA carburettor. Can be mounted on all DELLORTO models with standard thread! Delivered as presented with lock nut, tube, rubber, threaded length adjustment tube.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.