Reference: 26 4189
Kit tube 40mm bent 90 ° for carburettor MALOSSI
Ideal for lost or modify the passage of your cable.
Banner
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 53002_00 / 53002_78
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!