Reference: 1263
DELLORTO universal single cable tensioner screw for accelerator / choke
The tension adjuster which is placed at the end of your tubes.
Price
€3.33
Shipping in 1-3 days
Shipping in 1-3 days
- There are no more items in your cart
- Shipping Free
- Total €0.00
-
Banner
Locking nut (against nut) for DELLORTO cable tensioning screw
121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Description
Special nut Ø4mm special fine thread for cable tension adjustment screw on DELLORTO carburettors.
Product Details
121692
63 Items
New product
You might also like
16 other products in the same category:
Reference: 14958_00
Plastic bushel spring sleeve for DELLORTO PHBG and PHVB carburettor
Ideal in case of loss or breakage of your old support, bushel socket.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09779_00
Tank bottom cup on carburettor DELLORTO PHBG and others (small principal jet) not deep model
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09506
Float shaft for DELLORTO PHBG carburettors
Bar, axle, float holding rod for DELLORTO carb.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 26 4189
Kit tube 40mm bent 90 ° for carburettor MALOSSI
Ideal for lost or modify the passage of your cable.
Price
€13.33
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53024
Complete air richness screw for DELLORTO PHBG carburettors
The complete richness screw for your PHBG carburettors!
Price
€6.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 10431
Cup bottom of tank on carburettor DELLORTO PHBG and others (small main jet)
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Price
€2.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 09814_00
Tulip / venturi improvement adapter DELLORTO Ø32mm threaded X Ø60mm for PHBG
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Price
€9.99
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 493928
TEKNIX tank for carburetor on scooter Kymco Dink, Vivality and Peugeot Speedfight, Trekker, Buxy ...
A very aesthetic tank delivered with its seal and screws for a very good price!
Price
€6.66
Attention, may require a delay of more than 20 days!
Attention, may require a delay of more than 20 days!
Reference: 09811_00
Aluminum tank for cap on carburettor DELLORTO PHBG and PHBD
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
In stock
Reference: 506272
TEKNIX carburettor
Excellent in the event of a problem or leak from your carburetor.
Price
€8.33
Ships in 1-3 days
Ships in 1-3 days
Reference: 30 3338
Transparent MALOSSI tank for DELLORTO PHBG and PHBD carburettor
Ideal for permanent control of your fuel and your settings with ease.
Price
€10.83
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53002_00 / 53002_78
Complete cable choke kit for DELLORTO PHBG and Racing Red, Black Edition carburettor
A pack to switch your PHBG carburettors choke lever to cable choke!
Price
€12.49
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 08127_00
DELLORTO clamp screw for DELLORTO PHBG carburettor
Spare screw for clamp on DELLORTO PHBG carburettors all models.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 16962_00
bushel of screw cap for carburettor PHBG Racing Black and Red Edition
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Price
€27.49
Attention, may require a delay of more than 20 days
Attention, may require a delay of more than 20 days
Reference: 213458
O-ring screw richness DELLORTO carburettor PHBG, PHBE, PHBH, PHBL, VHST ...
A necessary part for the proper functioning of your carburetor.
Price
€1.66
Shipping in 1-3 days
Shipping in 1-3 days
Reference: 53016_00 / B53016B
Carburetor clamp kit DELLORTO PHBG and SHBC rigid
Kit of complete collar for rigid carburettor PHBG and SHBC!
Price
€5.41
Regular price
€10.83
Shipping in 1-3 days
Shipping in 1-3 days
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.