Reference: 09811_00
Aluminum tank for cap on carburettor DELLORTO PHBG and PHBD
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Banner
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 1282
Ideal for lost or just for a refurbishment without spending too much.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 26 4189
Ideal for lost or modify the passage of your cable.
Reference: 53024
The complete richness screw for your PHBG carburettors!