Reference: 343.0021
40mm 45 ° angled tube kit for POLINI, DELLORTO, ...
Ideal in case of loss or to pass your cable as desired.
Banner
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 1298
The little room in which hangs the starter cable.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 493928
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 129517
The only wealth screws for your PHBG!
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!