Banner
Maxikit complete with crankshaft and cast iron kit for DERBI EURO 3 and 4! Super torquey, powerful and robust!
TOP PERFORMANCES finally released its MAXIKIT 86cc for the DERBI EURO 3 engine!
This version has a specially balanced crankshaft for the DERBI GPR / APRILIA RS DERBI / RS4 engine so the engines with balancer.
The pack offers maximum torque and power, while remaining super robust.
Cast iron kit 5 transfers, oval large exhaust, head stud in two parts for good cooling.
Piston reinforced mono-segment, crankshaft full masses stroke 44mm specifically balanced for the piston ...
A very good pack to accompany a carburation in minimum 24mm, a racing exhaust, sport valves, a reinforced clutch ...
A variable advance ignition is a plut but not mandatory. Comes with extended studs, crankshaft bearings and spy joints.
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Specific References
Reference: 9921330
A high quality TOP PERFORMANCES needle cage for Peugeot 103, Minarelli am6... engines.
Reference: 9924150
Ideal for refurbishing your TPR cylinder and regaining compression. Available in two sizes, standard Ø50mm and reboring Ø50.4mm.
Reference: KK01008
Good quality bearing and oil seal at an affordable price.
Reference: 9930270
Essential spare part for the passage of an intake kit with large carburetor on DERBI engine.
Reference: 992701A
Replacement piston for your TOP PERFORMANCES 80cc cast iron kit! To change every 7000kms approximately.
Reference: 9930240
Pack seal for TOP PERFORMANCES 80cc cast iron kits on DERBI euro 3 and 4 engine, of excellent quality and essential after each disassembly.
Reference: 9928090
Ideal in case of wear of your old flange or even in case of breakage during the assembly of this one.
Reference: 9930210
Special high-end 44mm long stroke connecting rod, 90mm machined forged connecting rod, ... With Ø12 mm silver treated needle cage Dynamic balancing designed to be assembled with a balancer.
Reference: 9934280
Complete spare cylinder head (decomposable in two parts), special for the high engine in 44, 86cc race on Derbi euro 3 and 4.
Reference: 9934260
Top competition engine for DERBI euro 3 and 4! Special 44mm race, 86cc Ø50mm kit, 5 transfers, large oval exhaust. A real concentrate of power, to be accompanied by a 44mm long stroke crankshaft.
Reference: 9924250
Quality reinforced piston pin worthy of TOP PERFORMANCES .
Reference: 9934290
High-end studs, of very good quality, ideal for replacing your old worn or broken ones.
Reference: K.12.245.23.14
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special 44.90 race with ultra reinforced vilo designed to be mounted with balancer, 90mm connecting rod, 90cc Ø50mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume .... Clearly, a real performance monster!
Reference: K.12.788.GR
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special race 42 with ultra reinforced vilo without balancer, 90mm connecting rod, 75cc Ø47.6mm kit 6 transfers with large booster exhaust, studs, cylinder head with high compression stud with increased chamber volume .... Clearly, a real concentrate of performance!
Reference: 10500987
A 100% complete pack for DERBI euro 3 and 4 engine, maximum performance!
Reference: 9934270
Maxikit complete with crankshaft and cast iron kit for DERBI EURO 3 and 4! Super torquey, powerful and robust!
Reference: K.12.245.20
A 100% full competition pack for Derbi Euro 3 engine! Special race with 44.90 ultra strengthened vilo designed to be mounted without balancer, 90mm rod, 80cc kit Ø47,6mm 6 transfers with big exhaust booster, studs, cylinder head high compression pad with volume increased room. In short, a real concentrated performance!
Reference: K.12.245.24.14
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special race 44.90 with ultra reinforced crankcase designed to be mounted with balancer, 90mm connecting rod, 96cc Ø52mm 6 transfer kit with large booster exhaust...
Reference: pack_parmakit_110_euro_3
110cc pack with 46mm long stroke crankshaft and Ø55mm high engine for DERBI euro 3, 4 and 5
Reference: K.12.243.10
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special 43mm stroke with ultra reinforced vilo designed to be mounted with balancer, 90mm connecting rod, 80cc Ø47.6mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume .... Clearly, a real monster of performance in single...
Reference: K.12.243.20
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special 43mm stroke with ultra reinforced vilo designed to be mounted without balancer, 90mm connecting rod, 80cc Ø47.6mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume .... Clearly, a real monster of performance in single...
Reference: K.12.245.23
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special race 44.90 with ultra reinforced vilo designed to be mounted without balancer, 90mm connecting rod, 90cc Ø50mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume. In short, a real concentrate of performance!
Reference: 480588 + 468209
Set consisting of the excellent DOPPLER VORTEX kit and the reinforced DOPPLER linkage.
Reference: 10500887
A 100% complete pack for DERBI euro 3 and 4 engine, maximum performance at the rendezvous! Available from February 15, 2017!
Reference: K.12.243.13
A 100% complete competition pack for Derbi euro 3 and 4 engines! Special 43mm stroke with ultra reinforced vilo designed to be mounted with balancer, 90mm connecting rod, 85cc Ø50mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume .... Clearly, a real monster of performance in single...
Maxikit complete with crankshaft and cast iron kit for DERBI EURO 3 and 4! Super torquey, powerful and robust!
