• Banner

Pack ITALKIT Racing 80cc driving Ø48mm for mécaboite minarelli am6
  • Pack ITALKIT Racing 80cc driving Ø48mm for mécaboite minarelli am6

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft stroke 44 connecting rod 85mm) for mécaboite driving minarelli am6

K.44.848.G14

A 100% complete racing package for minarelli am6 engine! Special racing 44 with vilo ultra reinforced, kit 80cc Ø48mm exhaust 32mm, bearings celerons, springs of clutch, dowels .... A pack perfectly designed to be assembled together for maximum performance!

Stage 1 engine preparation
€333.33
Quantity
Shipping in 1-3 days

Description

Not approved on road open only for competition on the track, road closed.

New in 2014 is the tone: the highest crankshaft range Mazzuchelli (like MHR BIG Bore) with rod forged and litters of Ø20mm, cage 12x17x15, high-quality steels, balancing the dynamic top, excellent diagrams, stud bolt entering , an excellent compression ratio, cooling studied with a semi-closed type cylinder, 32mm diameter exhaust with boosters, specifically tailored skirt, 6 admission with transfer form studied, bearing Celerons, 44,00 race with Ø48mm diameter piston , Vertex piston graphite ....

vue Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

Competition has only to behave themselves and is far behind the most-hand maxi kits. Only downside of this pack, the absence of a connecting rod 90 mm!
A novelty of the great Spanish brand ITALKIT and finally available to us, this ultra complete 80cc engine pack mounts on mécaboite Minarelli AM6. This set will give you all the power sought to distinguish when you compete and win first place.

cylindre Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6


As usual, the ITALKIT brand is no exception to the rule in the pack of current best parts on the market. The aluminum alloy cylinder has a specific heat treatment and internal coating niquel / silica, giving it its strength and reliability, foolproof! Featuring no less than 9 lights including 6 transfers admission, 2 boosters worked to shape and finally the impressive exhaust outlet by its shape and size to the point that the outlet diameter has been revised upward and measure no less than Ø32mm (an exhaust ring is provided for passing a Ø28mm diameter exhaust).

piston Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

That's not all, Cooling also been completely revised and corrected in order to provide the best possible heat exchange and at the same time to get a performance gain consequently indeed less engine runs out of steam and heat and performance remain present. to accompany this cylinder, a racing stud bolt! Top model, specially designed to provide maximum compression. The breech block is used and mounted on O-ring, the combustion chamber is frustoconical in shape and has a very successful polished, smooth and clean.

culasse Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

The Ø48mm piston meanwhile is not chosen at random, it is a single segment model in VERTEX treatment with graphite. Suffice to say the material of the highest quality whose reputation / quality is second to none. The piston is equipped with a chrome finish 1mm thick segment thus promoting revving. With the graphite processing, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal change Diet and prolonged endurance of circuit.

zoom piston Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

In the end, the special crankshaft 44mm stroke and 85mm rod. This model is unique and once again very successful. It is perfectly balanced and carved out the best steel market. Its dynamic balancing result of the inorganic compound to tungsten carbide. This material is summarized in a combination of carbon and tungsten. It is a known material very dense, very strong and very hard. A new connecting rod is also installed on this linkage, ultra reinforced billet model. Ultra lightweight, it is really reserved for the competition!

embiellage Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

It is this type of rod that team real racing crankshafts BIDALOT or MALOSSI MHR BIG BORE and other rare vilo! Light weight and maximum rigidity are at the rendezvous. Its lubrication are improved, the cage rod feet is increased for a better grip, processed silver and mounted on anti-friction wedges. A linkage of you understand perfectly designed and adapted to support this high engine can withstand without no problem wildest engine speeds up to 16,000 rev / min and in combination with this cylinder and stroke 44, the actual displacement is 79,58cc.

bielle Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

In summary, this pack / Ø48mm 80cc racing kit for your engine Minarelli AM6 will be a major asset to offer you guaranteed victories and thrills! Delivered complete as presented, you can rely on photographs, they are binding as we usually do.

We recommend you to accompany this pack with minimum: a carburetor 28, a flexible mounting kit intake, ignition Selettra home ITALKIT with variable advance, cold NGK B105EGV obligatory racing motor oil, racing big relaxing escape ... essential volumes.

plot culasse Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

This pack contains:

Master cylinder Ø48mm aluminum 6 transfers with large exhaust boost
-piston VERTEX graphite mono segment Ø48mm
Aluminum cylinder head of -Couvercle
-Plot High compression cylinder head, the incoming type of tapered shape, polished finish
-Segment End Ø48 chromed 1mm thick
Axis-reinforced piston Ø12 X 37mm
-Clips Piston type G
-Vilebrequin Reinforced ultra long race 44mm rod 85mm ultra reinforced
X2 Celeron Bearings Ø20X47X14
-Cage To Ø12X17X15mm silver needle
-pack Motor attached with several joints of base plate of different thicknesses
X1 cylinder head for centering Pion
-Bague Exhaust Ø32 to 28mm reduction
-X4 Reinforced Clutch Springs

-X4 Reinforced Studs M7X120mm
-Installation instructions
-Autocollant

transferts Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

Technical summary:

- Work of original housings needed for shipments revised upwards
- Rear apron specific cylinder
- Cooling: Liquid semi-closed
- Compression ratio: 14.05: 1
- Fixing exhaust: Ø32mm
- Exhaust Diagram: 188.20
- Admission diagram (lateral transfers): 132.50
- Admission diagram (rear transfers): 132.50
- Displacement announced: 80cc
- Actual Capacity: 79,58cc

montage Pack ITALKIT Racing 80cc Ø48mm pour mécaboite moteur minarelli am6

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)

-Beta CRE

RR -Beta
-Beta RR ALU

-Honda HM
-Honda CRE
-Honda BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
K.44.848.G14
1 Item
New product

Data sheet

Cylinder head:
A stud (2 parts) tapered
Cylindrée réelle
86,35cc
Intake diagram (lateral transfers):
132.50
Echappement
Ø32mm
Recommended squish:
0.70mm
Nombre de transferts d'admission
6 transfers
Matière
Aluminium
Bielle
85mm
Diameter (Ø):
48mm
Refroidissement
semi-closed
Exhaust Diagram:
188.20
Transferts a l'embase
Large transfers (work of the original casings necessary)
Intake diagram (rear transfers):
132.50
Lumière d'échappement
To boost (3 lights)
Course
44mm
Compression ratio:
14.05:1
Nombre de segment
Mono-segment (1 segment)
Displacement:
80cc
You might also like
12 other products in the same category:

Reference: PK88BRKAM6

BRK Competition Systems By BARIKIT

Pack BARIKIT BRK 88cc for mécaboite minarelli am6

A complete pack for racing engine minarelli am6! Special race with 45 vilo reinforced kit 88cc race 45, large exhaust volume, pack bearings celeron .... A lot of room perfectly designed to be assembled together for maximum performance!

Price 724,13 €
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: K.44.849.GR2

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft 44 race rod 90mm) for mécaboite minarelli am6

Genuine 100% full competition pack for minarelli am6! Special race 44 and 90mm rod with ultra strengthened vilo, 80cc kit Ø48mm 32mm exhaust, Celerons bearings, clutch springs, .... A pack perfectly designed to be assembled together for maximum performance!

Price €333.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: K.44.952.G14

ITALKIT

Pack ITALKIT Racing 95cc Ø52mm (with crankshaft stroke 44 connecting rod 85mm and axis 14mm) for mécaboite minarelli am6

A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 95cc Ø52mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!

Price €349.99
Shipping in 1-3 days
More
Shipping in 1-3 days

Reference: K.44.851.G14

ITALKIT

Pack ITALKIT Racing 85cc Ø50mm (with crankshaft stroke 44 connecting rod 85mm and axis 14mm) for mécaboite minarelli am6

A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 85cc Ø50mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!

Price €349.99
Shipping in 1-3 days
More
Shipping in 1-3 days