• Banner

  • Pack
Driving Pack BARIKIT BRK 88cc for mécaboite minarelli am6
  • Driving Pack BARIKIT BRK 88cc for mécaboite minarelli am6

Pack BARIKIT BRK 88cc for mécaboite minarelli am6

PK88BRKAM6

A complete pack for racing engine minarelli am6! Special race with 45 vilo reinforced kit 88cc race 45, large exhaust volume, pack bearings celeron .... A lot of room perfectly designed to be assembled together for maximum performance!

Description

Here the pack racing engine of the Spanish brand BARIKIT BRK for mécaboite minarelli am6 engine powering much of 50cc motorcycles market. This pack consists of special aluminum cylinder 45 50mm stroke, 88cc with immense torque, high-rpm and maintains a good strength, its exhaust to match appropriately to the cylinder and to release the performance of this last, the special crankshaft ultra reinforced 45mm long race and a competition celeron pack bearings + joined spy Viton racing to complete the reinforcement of driving bottom.

cylindre Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

The cylinder has 5 admission and transfer of a large exhaust with bar perfectly designed to be tailored to its large exhaust volume. The famous piston mono segment to promote high speeds with a specifc treatment to blue graphite, or name: Sapphire Blue, without neglecting low revs and torque. And finally, a high compression cylinder head stud that will significantly improve the cooling of your engine and its performance with its improved combustor.

piston Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

To strengthen and support the top engine, the crankshaft BRK Special Competition long race 45mm. Perfectly balanced and provided with full masses for more pre compression and excellent inertia. Provides with its needle cage Ø12mm X 16mm X 16mm, it will also withstand the high speeds that will develop its high engine! We regret that it is in silks (carried bearings) of Ø17mm original size but its strength is in any case questioned!

vilebrequin Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

Obviously, this pack is reduced fare to accompany valves racing of 0.35 or 0.40mm thickness to provide a perfect setting for your admission, with this we strongly recommend the use and installation of a large carburetor flat-slide of 26 to 30mm minimum diameter for the better with meticulous and perfect settings.

barrette cylindre Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

Ignition racing internal rotor competition (and lighting) will also be welcome to optimize and increasingly unleash the power of this set, with honing and settings a BR9ES candle and following a competition candle iridium as the BR10EIX. That's not all, to support schemes, torque and accelerations ... we urge to be a good range of clutch reinforced with Kevlar discs and hard springs.

vue Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

To conclude and finalize the installation, also remember to use good racing engine oil 100% synthesis (part especially not neglect the risk of breakage, primers ...), at the same time a box of racing oil of good quality to support the new power and engine speeds, a full ring game engine for a complete refurbishment, a cooling system purge by racing to improve your liquid cooling ....

échappement pot Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

With this pack, you will guaranteed a lot of room agreeing perfectly together at any point. You can choose to select or not the exhaust, and a very interesting option exclusive engine preparation explained below, by our specialist / trainer!

Pack therefore comprises:

-Kit 88cc Ø50mm BARIKIT BRK Special Competition 45mm stroke
-Vilebrequin BARIKIT BRK Special Competition 45mm racing silks of Ø17mm
-Pot Exhaust BARIKIT BRK large volumes Competition Special 45mm run down crossing
-pack Competition celeron bearings + joined spy Viton racing

The total value added in separate parts amounted to € 869.86! Either a gain of € 92.87 with this complete pack with exhaust (option without preparation).

panier pack barikit brk 88cc course 45 minarelli am6

With this pack we suggest you (as explained above) to buy or carry a minimum: pack joined complete engine , pasta tube attached , gearbox oil , set of nozzles, candle B9ES or BR9ES for settings and BR10 EIX once the set motorcycle racing dampers 0.30 or 0.40mm, flat-slide carburetor from 26 to 30mm, unbridled racing ignition. fuel tap without depression (on / off) . If you want to blend in, plan a pump seal Oil (DOPPLER make them excellent). In all cases, provide a high quality 100% synthetic oil as the IPONE or DOPPLER. Plan as the coolant nine.

zoom Pack BARIKIT BRK 88cc pour mécaboite moteur minarelli am6

Preparation Option: for a fee of 85 euros extra, we prepare your cylinder (preparation stage 1), this further increases the performance of your engine. This includes: A selection of the best basic parts of our stock. Retouching and finishing of cylinder / piston with comprehensive studies and best of our knowledge. Increased exhaust timing.

Remember to select your options before adding to cart!

Product Details
PK88BRKAM6
New product
You might also like
12 other products in the same category:

Reference: K.44.851.G14

ITALKIT

Pack ITALKIT Racing 85cc Ø50mm (with crankshaft stroke 44 connecting rod 85mm and axis 14mm) for mécaboite minarelli am6

A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 85cc Ø50mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!

Price €349.99
Shipping in 1-3 days
More
Shipping in 1-3 days

Reference: K.44.848.G14

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft stroke 44 connecting rod 85mm) for mécaboite driving minarelli am6

A 100% complete racing package for minarelli am6 engine! Special racing 44 with vilo ultra reinforced, kit 80cc Ø48mm exhaust 32mm, bearings celerons, springs of clutch, dowels .... A pack perfectly designed to be assembled together for maximum performance!

Price €333.33
Shipping in 1-3 days
More
Shipping in 1-3 days

Reference: K.44.849.GR2

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft 44 race rod 90mm) for mécaboite minarelli am6

Genuine 100% full competition pack for minarelli am6! Special race 44 and 90mm rod with ultra strengthened vilo, 80cc kit Ø48mm 32mm exhaust, Celerons bearings, clutch springs, .... A pack perfectly designed to be assembled together for maximum performance!

Price €333.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: K.44.952.G14

ITALKIT

Pack ITALKIT Racing 95cc Ø52mm (with crankshaft stroke 44 connecting rod 85mm and axis 14mm) for mécaboite minarelli am6

A 100% complete competition pack for minarelli am6 engine! Special race 44 with ultra reinforced vilo on 14mm axis, 95cc Ø52mm 32mm exhaust kit, celerons bearings, clutch springs, studs .... A pack perfectly designed to be assembled together for maximum power!

Price €349.99
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: 9924240

TOP PERFORMANCES RACING (TPR)

Maxi kit TOP PERFORMANCES RACING TPR aluminum 86cc (with crankshaft) minarelli am6

A complete pack with reinforced 44mm long stroke crankshaft, bearing pack, key, aluminum cylinder 5 transfers with large bar exhaust and integrated base wedge, cap in the brand's color... ideal for preparing a high-performance engine.

Price €349.99
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES
More
Shipping in 8 to 15 days depending on factory arrivals TOP PERFORMANCES

This pack contains