• Banner

Pack ITALKIT Racing 80cc Ø48mm mono segment (with 43mm stroke crankshaft) for mécaboite engine DERBI euro 1 & 2
  • Pack ITALKIT Racing 80cc Ø48mm mono segment (with 43mm stroke crankshaft) for mécaboite engine DERBI euro 1 & 2

Pack ITALKIT Racing 80cc Ø48mm single segment (with 43mm stroke crankshaft) for mécaboite driving DERBI euro 1 & 2

K.12.143.21

A competition pack special 100% complete for engine Derbi euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø48mm 6 transfers with big exhaust booster, studs, stud high compression cylinder head with increased volume of room .... Clearly, an engine with guaranteed performance piston mono segment!

Engine preparation
Quantity

Description

Photo and more complete description coming !!! Main Photo no contractual !!!

Not approved on road open only for competition on the track, runs, road closed.

New in 2014, it says it all: high-end forged crankshaft with 90mm rod and brought to Ø20mm without balancer, cage 12x17x15, high-quality steels, dynamic balancing at top, excellent diagrams, high-compression cylinder head stud, excellent compression, cooling studied with a semi-closed type cylinder, large diameter exhaust with boosters passing on lateral transfers, 6 large intake transfers with specific forms and studied architecture, race 43 with Ø48mm diameter piston, piston mono segment graphite,...

As usual, the ITALKIT brand is no exception to the rule in the pack of current best parts on the market. The aluminum alloy cylinder has a specific heat treatment and internal coating niquel / silica and external chrome, delivering it its strength and reliability, foolproof! Featuring no less than 9 lights including 6 transfers of admission including 3 side and 2 rear, 2 boosters shapes worked on from the side and finally the impressive exhaust outlet by its shape and size to the point that the outlet diameter has been reviewed upward and measure no less than Ø30mm between fixing axis for exhaust 46 mm.

Competition has only to behave themselves and is far behind the most-hand maxi kits. Only downside of this pack, the absence of a clear set clutch, bearings Celerons and several joints of base plate as the pack for AM6! A novelty of the great Spanish brand ITALKIT and finally available to us, this ultra complete 80cc engine pack mounts on mécaboite driving DERBI Euro 1 & 2. This set will give you all the power sought to distinguish when you compete and win first place .

That's not all, Cooling also been completely revised and corrected in order to provide the best possible heat exchange and at the same time to get a performance gain consequently indeed less engine runs out of steam and heat and performance remain present. to accompany this cylinder, a racing stud bolt! Top model, specially designed to provide maximum compression. The cylinder head stud has a hemispherical combustion chamber and has a very successful polished, smooth and clean. Room issue revised upwards at the same time.

The Ø48mm piston meanwhile is not chosen at random, it is a model mono segment with graphite treatment. Suffice to say the material of the highest quality whose reputation / quality is second to none. The piston is equipped with a chrome end segment thickness 1mm thus promoting revving. With the graphite processing, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal change Diet and prolonged endurance of circuit.

In the end, the special crankshaft 43mm stroke and 90mm rod without balancer. This model is unique and again, really successful. It is perfectly balanced and carved out the best steel market. Its dynamic balancing result of the inorganic compound to tungsten carbide. This material is summarized in a combination of carbon and tungsten. It is a known material very dense, very strong and very hard. A new connecting rod is also installed on this linkage, ultra reinforced billet model. Ultra lightweight, it is really reserved for the competition!

It is this type of rod that team real racing crankshafts BIDALOT or MALOSSI MHR BIG BORE and other rare vilo! Light weight and maximum rigidity are at the rendezvous. Its lubrication are improved, the cage rod feet is increased for a better grip, processed silver and mounted on anti-friction wedges. A linkage of you understand perfectly designed and adapted to support this high engine can withstand without no problem wildest engine speeds up to 16,000 rev / min and in combination with this cylinder and 43mm stroke, the real capacity is 77,81cc.

Clearly, this pack / kit Ø48mm 80cc racing for your DERBI euro 1 & 2 engine will be a key asset to offer you guaranteed victories and thrills to the key!

We recommend to accompany this pack with minimum: a carburizing 26-28 for the better, a flexible mounting kit admission, ITALKIT in Selettra of ignition with variable advance, cold NGK B105EGV obligatory racing motor oil, relaxing racing exhaust large volumes needed ....

This pack contains:

Master cylinder Ø48mm aluminum 6 transfers with large exhaust boost
-piston Graphite mono segment Ø48mm
Aluminum cylinder head of -Couvercle
-Plot High compression hemispherical cylinder head, polished finish
-Segment End Ø48mm chromed 1mm thick
Axis-reinforced piston Ø12 X 37mm
Crab-like piston -Clips
-Vilebrequin Reinforced ultra long race 43mm rod 90mm ultra reinforced
-Cage To Ø12X17X15mm silver needle
-pack Engine gasket
-X4 Reinforced Studs M7X120mm
-Installation instructions
-Autocollant

R Technical écapitulatifs:

- Work of original housings needed for shipments revised upwards
- Cooling: Liquid semi-closed
- Compression ratio: nc
- Displacement announced: 80cc
- Actual Capacity: 77,81cc
- Power announced: nc
- Joint of base plate thickness provides nc
- Squish value recommended nc
- Volume of the chamber (breech) nc

Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:

BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto

Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2

GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc

And many other models ...

Product Details
K.12.143.21
New product
You might also like
14 other products in the same category:

Reference: K.12.145.13

ITALKIT

Pack ITALKIT Racing 90cc Ø50mm mono-segment (crankshaft stroke 44,90mm with balancer) engine DERBI euro 1 & 2 special GPR

A 100% complete special racing pack for Derbi Euro 1 & 2 GPR engine! Long stroke 44,90mm with ultra reinforced vilo, 90mm connecting rod, kit 90cc Ø50mm 6 transfers with large exhaust booster, studs, cylinder head input high compression with room volume increased .... In summary, a special performance engine in mono segment!

More
In stock

Reference: K.12.143.22

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm bi segment (with 43mm stroke crankshaft) for mécaboite driving DERBI euro 1 & 2

A competition pack special 100% complete for engine Derbi euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø48mm 6 transfers with big exhaust booster, studs, stud high compression cylinder head with increased volume of room .... Clearly, an engine with guaranteed performance in dual piston segment!

More
In stock

Reference: K.12.145.10.14

ITALKIT

ITALKIT Racing 80cc Ø47.6mm mono-segment pack (44.90mm stroke crankshaft with balancer) DERBI euro 1 & 2 special GPR engine

A 100% complete competition pack special for Derbi euro 1 & 2 GPR engines! Long stroke 44.90mm with ultra reinforced vilo, 90mm connecting rod, 80cc Ø47.6mm kit 6 transfers with large booster exhaust, studs, cylinder head with incoming high compression stud with increased chamber volume .... In short, a special performance engine in single segment!

More
In stock

Reference: K.12.143.12

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm bi-segment (with 43mm stroke crankshaft balancer) DERBI euro 1 & 2 special GPR

A competition pack special 100% complete for engine Derbi GPR euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø48mm 6 transfers with big exhaust booster, studs, breech block incoming high compression with volume increased room .... In summary, a special engine performance bi segment!

More
In stock

Reference: K.12.143.10

ITALKIT

Pack ITALKIT Racing 80cc Ø47,6mm mono segment (43mm crankshaft balancer race) driving DERBI euro 1 & 2 special GPR

A competition pack special 100% complete for engine Derbi GPR euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø47,6mm 6 transfers with big exhaust booster, studs, breech block incoming high compression with volume increased room .... In summary, a special engine performance!

More
In stock

Reference: K.12.143.13

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm bi-segment (with 43mm stroke crankshaft balancer) DERBI euro 1 & 2 special GPR

A competition pack special 100% complete for engine Derbi GPR euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø48mm 6 transfers with big exhaust booster, studs, breech block incoming high compression with volume increased room .... In summary, a special engine performance bi segment!

More
In stock

Reference: K.12.145.20

ITALKIT

Pack ITALKIT Racing 80cc Ø47,6mm mono segment (44.90mm with stroke crankshaft) DERBI euro 1 & 2

A competition pack special 100% complete for engine Derbi euro 1 & 2! Long race with 44.90 ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø47,6mm 6 transfers with big exhaust booster, studs, stud high compression cylinder head with increased volume of room .... Clearly, an engine with guaranteed performance!

Price €333.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: K.12.145.23.14

ITALKIT

ITALKIT Racing 90cc Ø50mm mono segment pack (with 44.90mm stroke crankshaft) DERBI euro 1 & 2 engine

A 100% complete competition pack special for Derbi euro 1 & 2 engines! Long stroke 44.90 with ultra reinforced vilo, 90mm connecting rod, 90cc Ø50mm kit 6 transfers with large booster exhaust, studs, high compression stud cylinder head with increased chamber volume .... Clearly, an engine with guaranteed performance!

Price €333.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!

Reference: K.12.143.23

ITALKIT

Pack ITALKIT Racing 85cc Ø50mm bi segment (with crankshaft stroke 43mm) for mécaboite driving DERBI euro 1 & 2

A 100% complete special racing pack for Derbi Euro 1 & 2 engine! Long stroke 43 with vilo ultra reinforced, connecting rod 90mm, kit 85cc Ø50mm 6 transfers with big exhaust booster, studs, cylinder head high compression with room volume increased .... Clearly, an engine with guaranteed performance in piston segment bi!

More
In stock

Reference: K.12.143.20

ITALKIT

Pack ITALKIT Racing 80cc Ø47,6mm mono segment (with 43mm stroke crankshaft) for mécaboite driving DERBI euro 1 & 2

A competition pack special 100% complete for engine Derbi euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø47,6mm 6 transfers with big exhaust booster, studs, stud high compression cylinder head with increased volume of room .... Clearly, an engine with guaranteed performance piston mono segment!

More
In stock

Reference: K.12.143.11

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm single segment (with 43mm stroke crankshaft balancer) DERBI euro 1 & 2 special GPR

A competition pack special 100% complete for engine Derbi GPR euro 1 & 2! Long race with 43 ​​ultra strengthened vilo, connecting rod 90mm, 80cc kit Ø48mm 6 transfers with big exhaust booster, studs, breech block incoming high compression with volume increased room .... In summary, a special engine performance in single segment!

More
In stock