Reference: 1216132B
Diffuser of valves (venturi) of valve MALOSSI VL18
Required part for perfect operation of the gas supply.
Banner
These valves are the improved version of the VL15 valves, these VL18 have an aluminum base covered with more worked viton in order to absorb the closing of the slats and to make the closed admission more watertight. They are reviewed and corrected at other levels by MHR. Valves that we recommend for a carburation of 17.5 to 28mm, they are excellent on small, medium and large configuration.
They are delivered with single 0.23mm carbon slats. You can buy a separate set of slats of all thicknesses to make better settings (namely that the engine that speaks at low speeds (torquey) will accept thinner slats and the engines that speak at very high speeds will require very high speed slats. rigid (like 0.40mm). These valves are delivered with a diffuser (venturi) to better direct the gases, do not make the mistake of removing it! This diffuser brings you performance. The ideal is to align your pipe to this diffuser.
* Now delivered with two diffusers, one adapted to carburations from 12 to 23mm, and the other from 23 to 30mm.
Mounts on :
-All DERBI EURO engines 1, 2, 3, 4, 5 ...
-Minarelli am3, 4, 5, 6 ... Euro 1, 2, 3 ...
-Peugeot 103 with MALOSSI housings
-Peugeot 103 or MBK 51 with MALOSSI casings and RRD adaptation wedge
-MBK 51 / av10 motobecane with EURO CILINDRO housings
....
Reference: 1216132B
Required part for perfect operation of the gas supply.
Reference: 2718510
The best way to get MALOSSI carbon quality at the right price, and above all to choose the appropriate thickness for the maximum performance of your engine, is mounted on a VL18 valve box!
Reference: CL 10
A competition model that will allow you to greatly improve the performance of your 2 wheels.
Reference: 284766
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: LP.44.3
A set of 2 improved slats for motorbike with minarelli am6 engine.
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 468219
Ideal to repair your valves DOPPLER ER2 on motorcycle 50cc engine am6.
Reference: LC.12.2
High quality competition valves, aluminum base adhered!
Reference: 1216132B
Required part for perfect operation of the gas supply.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: 2712430.C0
A set of six high-end blades to have the most accurate setting.
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 9906500
High-end valves, aluminum base with rubber bonded to the carbon plates!
Reference: 365091
DOPPLER ER3 competition valves with carbon slats!