Reference: LP.44.40
Set of 4 carbon ITALKIT slat 0,28mm for valves ITALKIT dual competition roofs for minarelli am6, derbi ...
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Banner
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Here is an ultimate competition admission kit from ITALKIT (official GILARDONI) for your mécaboite 50cc 2-stroke Minarelli AM6 engines. With high-end real carbon slats 0.32mm thick.
Not to change anything, the ITALKIT brand once again offers competition equipment at high prices but of high quality. Specially designed to be adapted to a carburetor from 24 to 28mm with a male carburetor (entering) with a fixing diameter of 28 to 35 mm.
This set has a 4-blade valve box (V FORCE type), a molded aluminum diffuser as well as a Ø35mm intake pipe perfectly suited to the viton rubber assembly in order to avoid emulsions by erasing the better engine vibrations so as not to transmit them to the carburetor. This offers a super short intake, a perfect diffuser, a choice of carburetor up to 28mm possible, and absolutely monstrous performance compared to what is done elsewhere.
The gearbox therefore has carbon fiber slats with a thickness designed to favor power without losing torque thanks to the 4 slat system (2 inside and 2 outside) called double V, with double roofs. The valve box is also adhered to Viton rubber to allow the perfect sealing of the slats as well as a soft closing of the slats thus repelling their wear.
Completely removable, the valve slats are available separately! This 100% complete pack is provided with two valve seals. A very good gain in power whether at low or high speed is obtained thanks to this complete gearbox with short intake pipe.
Technical characteristics:
-System 4 slats (2 interior and 2 exterior) in 0.28mm thick carbon fiber.
-Pipe flexible admission Ø35mm.
-Fixing for carburettor Ø28 to 35 mm.
-Fixing distance 60 X 38mm.
-Mounting on mécaboite 50cc AM6 and DERBI (also PEUGEOT 103 with MALOSSI housings, MALOSSI MG housings ...)
Reference: LP.44.40
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: LP.44.40
Replacement blade set essential for the proper functioning of your admission Competition ITALKIT double roofs.
Reference: 2712430.C0
A set of six high-end blades to have the most accurate setting.
Reference: 284766
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 9906500
High-end valves, aluminum base with rubber bonded to the carbon plates!
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: LC.44.35
One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 9933770
Replacement valve slats for V FORCE boxes on minarelli am6.
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: LC.44.40.1
The famous ITALKIT competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 2013800
The high-end and ultra-efficient Viton version!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 480755
Quality valves for guaranteed performance!