• Banner

Kit 80cc ITALKIT Racing Ø48mm aluminium (special race 44mm, without cylinder head) for minarelli am6
  • Kit 80cc ITALKIT Racing Ø48mm aluminium (special race 44mm, without cylinder head) for minarelli am6

Cylinder - Cylinder without piston aluminum ITALKIT Racing 80cc Ø48mm special 44mm 85mm rod racing for minarelli am6

CI.44.848.GR2

Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a long-stroke crankshaft with 44,00mm rod 85mm and its cylinder head high compression pad.

Stage 1 engine preparation
€196.66
Quantity
Shipping in 1-3 days

Description

Not approved on road open only for competition on the track, road closed.

This cylinder, cylinder piston 80cc Ø48mm without mounts on mécaboite Minarelli AM6, the replacement pack racing 80cc with long stroke crankshaft and cylinder head 44,00mm high compression pad with incoming combustion chamber. A therefore accompany the ITALKIT crankshaft bearings celeron with 44.00 and race rod 85mm. in combination of the race 44, the actual displacement is 79,58cc. with a crankshaft race originally a 2.5mm shim under the cylinder will be essential. Do not forget to ask her specific tailored breech.

vue Kit 80cc ITALKIT Racing aluminium Ø48mm (spécial course 44mm, sans culasse) pour minarelli am6

The cylinder is made ​​of aluminum alloy and has a specific heat treatment and internal coating niquel / silica, giving it its strength and reliability. Equipped with 6 transfers of admission, 2 boosters shapes worked and finally the impressive exhaust outlet by its shape and size to the point that the outlet diameter has been revised upward and measure no less than Ø32mm (an exhaust ring is provided for the passage of a diameter exhaust Ø28mm).

joints Kit 80cc ITALKIT Racing aluminium Ø48mm (spécial course 44mm, sans culasse) pour minarelli am6

Cooling also been completely revised and corrected in order to provide the best possible heat exchange and at the same time to get a performance gain consequently, indeed least one engine runs out of steam and heated and performance remain present. the Ø48mm piston meanwhile is not chosen at random, it is a single segment model in VERTEX treatment with graphite. Suffice to say the material of the highest quality whose reputation / quality is second to none. The piston is equipped with a chrome finish 1mm thick segment thus promoting revving. With graphite processing, forms and composition, this piston was very well designed and studied in order to provide better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal regime change and prolonged endurance of circuit.

piston Kit 80cc ITALKIT Racing aluminium Ø48mm (spécial course 44mm, sans culasse) pour minarelli am6

Delivered complete as presented, you can rely on photographs, they are binding as we usually do. This cylinder / piston will be ideal when worn or breaks and replace your old high engine without any change.


We recommend to accompany this pack with minimum: a carburetor 28, a flexible mounting intake kit, crankshaft ultra reinforced ITALKIT race Competition 44 / 85mm rod, cylinder head high compression pad ITALKIT with stud incoming Selettra ignition in ITALKIT with variable advance, cold NGK B105EGV, compulsory motor racing oil, relaxing racing exhaust large volumes needed ....

contains:

Master cylinder Ø48mm aluminum 6 transfers with large exhaust boost
-piston VERTEX graphite mono segment Ø48mm
-Segment End Ø48 chromed 1mm thick
Axis-reinforced piston Ø12 X 37mm
-Clips Piston type G
-pack Motor attached with several joints of base plate of different thicknesses
X1 cylinder head for centering Pion
-Bague Exhaust Ø32 to 28mm reduction
-Installation instructions
-Autocollant

zoom Kit 80cc ITALKIT Racing aluminium Ø48mm (spécial course 44mm, sans culasse) pour minarelli am6

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)

-Beta CRE

RR -Beta
-Beta RR ALU

-Honda HM
-Honda CRE
-Honda BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
CI.44.848.GR2
20 Items
New product

Data sheet

Compression ratio:
14.05:1
Nombre de segment
Mono-segment (1 segment)
Exhaust Diagram:
188.20
Cylindrée réelle
79.58cc
Intake diagram (rear transfers):
132.50
Echappement
Ø32mm
Displacement:
80cc
Nombre de transferts d'admission
6 transfers
Matière
Aluminum
Diameter (Ø):
48mm
Refroidissement
Specific semi-closed liquid
Intake diagram (lateral transfers):
132.50
Transferts a l'embase
Large transfers (work of the original casings necessary)
Recommended squish:
0.70mm
Lumière d'échappement
To boost (3 lights)

Specific References

ean13
8400000055680
You might also like

Reference: K.44.848.G14

ITALKIT

Pack ITALKIT Racing 80cc Ø48mm (with crankshaft stroke 44 connecting rod 85mm) for mécaboite driving minarelli am6

A 100% complete racing package for minarelli am6 engine! Special racing 44 with vilo ultra reinforced, kit 80cc Ø48mm exhaust 32mm, bearings celerons, springs of clutch, dowels .... A pack perfectly designed to be assembled together for maximum performance!

Price €333.33
Shipping in 1-3 days
More
Shipping in 1-3 days
9 other products in the same category:

Reference: CI.44.849.GR2

ITALKIT

Cylinder - Cylinder without piston aluminum ITALKIT Racing 80cc Ø48mm special 44mm 90mm rod racing for minarelli am6

Cylinder / piston without cylinder head replacement kit 80cc Ø48mm, 6 transfers, large 32mm exhaust .... To accompany a 44,00mm long stroke crankshaft with 90mm rod and only its head high compression pad.

Price €203.33
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!