• Banner

ITALKIT Racing 125cc kit for 125cc ROTAX 123 engine, Aprilia RS, AF1, EUROPA, PEGASO, and other 2-strokes
  • ITALKIT Racing 125cc kit for 125cc ROTAX 123 engine, Aprilia RS, AF1, EUROPA, PEGASO, and other 2-strokes

125cc ITALKIT Racing kit for 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO, and other 2-stroke engines

CI.01.128.G

A radical solution to improve the performance of your 125cc 2-stroke rotax 123 engine! High-end aluminum cylinder, 54mm diameter piston mono-segments with studied intake transfers and valve exhaust ...

Stage 1 engine preparation
€323.33
Quantity
Shipping in 1-3 days

Description

Mounts with the original cylinder head. Approved cylinder respecting the 125cc displacement.

 

Here is the complete 125cc cylinder / piston kit from the big brand ITALKIT Competition for 125cc 2-stroke engine ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO, ... and other models.

 

Photo du piston sur le kit 1255 ITALKIT pour moteur ROTAX 123

 

This original type kit very well improved from ITALKIT offers a real power gain compared to the original and preserves a very good solidity, a diameter of 54mm for the VERTEX piston is an original displacement of 125cc.

 

Photo du cylindre 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO, et autres 2 temps

 

The cylinder is therefore an aluminum model with a well-designed architecture and channels. With genuinely well-designed specific intake transfers and a large valve exhaust, oval / enlarged.

 

Photo du kit 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO, et autres 2 temps

 

The valve exhaust system is identical to the original, the valve is not supplied with this cylinder, so you will have to take back the original part.

 

Photo des transferts sur le cylindre 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO

 

The aluminum alloys used are excellent and will guarantee increased reliability and solidity of your engine, provided that it is mounted perfectly and without burrs.

 

Photo de la valve d'échappement sur le cylindre 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO

 

This cylinder is accompanied by a high-end VERTEX piston with specific heat treatment. Its 2 thin thickness segments will favor frank recoveries, revving but without neglecting speed at high revs in view of their finesse.

 

photo du kit 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO

 

Thanks to the treatment, its forms and its composition, this piston has been very well designed and studied in order to offer better thermal expansion, at the same time fitting perfectly with this cylinder to support frank recoveries, brutal change of regimes and prolonged use.

 

Photo du haut moteur 125cc ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO

 

Obviously delivered complete as presented, you will be as surprised as we have been on this material which guarantees extreme reliability and performance largely at the rendezvous.

 

Photo du kit cylindre piston ITALKIT Racing pour moteur 125cc ROTAX 123, aprilia RS, AF1, EUROPA, PEGASO, et autres 2 temps

 

We recommend it with at least: a detent exhaust, a minimum carburetor 30mm (flat bushel will be perfect), original cylinder head. If your engine is prepared, or even old, we will recommend changing the crankshaft, by the way do not hesitate to ask a reinforced connecting rod kit. A set of rigid strips of carbon valves will also be welcome in order to exploit the right regimes.

 

Optionally we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

 

This 123 model (unlike the 122) normally needs a modification at the location of the valve to install a pneumatic valve, but the cylinder being an ITALKIT, the hole is already drilled! There is therefore no modification to be made to install a pneumatic valve!

Product Details
CI.01.128.G
20 Items
New product

Specific References

ean13
8400000050784
You might also like
16 other products in the same category: