• Banner

Kit 125cc ITALKIT for engine 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12 and others 2 times
  • Kit 125cc ITALKIT for engine 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12 and others 2 times

§ Kit 125cc to 125cc engine ITALKIT CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12 and other 2 times

CI.07.125.1

Out of production!

Quantity

Description

Fits with the original cylinder head. Respecting approved cylinder 125cc engine.

Here is the kit cylinder / piston 125cc full of great brand ITALKIT Competition for engine 125cc 2 Time CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12 ... and other models. This original type kit very well improved in ITALKIT offers real power gain compared to the original and maintains very good fastness, 56mm diameter piston VERTEX for an original 125cc engine combined race original crankshaft of 50,6mm.

interne Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

The cylinder is an aluminum model with a well designed architecture and canals. With 6 intake transfers 2 with the specific rear and a large exhaust valve with booster, of oval / extended form. The valve exhaust system is identical to the original, the valve is not provided with this cylinder, so you need to take the original part.

admission Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

The aluminum alloys used are excellent and will ensure reliability and better durability of your engine, providing a perfect fit and flawless. This cylinder comes with a twin piston segments VERTEX upscale with specific heat treatment and graphite. 2 segments for its thickness 1mm promote the free times, the ramp-up but without neglecting the high speed regimes to their subtleties.

piston Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

With the graphite processing, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal change schemes and prolonged use.

échappement Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

Obviously delivered complete as presented, you will be as surprised as we have been on this equipment which guarantee extreme reliability and performance largely to appointments.

transferts Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

We recommend at least: a relaxing escape, a minimum of 30mm carburetor (flat bushel is perfect), original cylinder head. If your engine is prepared, or old, we recommend changing the crankshaft, by the way do not hesitate to ask a rod kit strengthened. A set of rigid carbon flaps slats will also be welcome to exploit the good plans.

contains:

-cylinder Ø56 mm aluminum 6 transfers with exhaust boost
-piston Bi VERTEX segment with graphite treatment
-2 Steel Segment end 1mm thick
Axis-reinforced piston Ø16 X 45mm
Piston -Clips C
VERTEX -pack complete seal
-between Admission axis 71 X 52mm

vue Kit 125cc ITALKIT pour moteur 125cc CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO, C10, C12

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

Product Details
CI.07.125.1
New product
You might also like
16 other products in the same category: