• Banner

Kit 50cc Ø40mm Aluminum DOPPLER S1R for liquid PIAGGIO (NRG, RUNNER...)
  • Kit 50cc Ø40mm Aluminum DOPPLER S1R for liquid PIAGGIO (NRG, RUNNER...)

Kit 50cc Ø40mm with cylinder head DOPPLER S1R aluminum scooter PIAGGIO Liquid (NRG, RUNNER ...)

477539

A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.

Stage 1 engine preparation
€83.33
Quantity
Attention, may require a delay of more than 20 days!

Description

Here is a small very powerful cylinder, the kit 50cc DOPPLER S1R in Ø40mm. Made of quality aluminum, its finish is good and it has a very racing architecture! Thanks to its diagrams revised upward, its reworked channels, 5 transfers and its exhaust to boost! You will have enough to please you while respecting the authorized displacement. Of course nothing to do with the 70cc but significantly better than a cylinder origin. The piston is a single-segment model chrome end hard curved to limit friction and allow higher speeds. In our eyes, it's a real little kit full of surprise to gain performance while respecting the displacement of 50cc! Its cylinder head is high quality frustoconical compression model, polished finish. Delivered complete as presented in photography with its high compression yoke, its joints, its piston, segment, clips, axis of piston, studs of exhaust ... To remember that the aluminum offers a better dissipation of the heat, but also a better expansion, less friction ... than a cast iron cylinder.


The pack contains:


X2 piston clips
X1 segment
X1 racing head
X1 piston Ø40mm
X1 piston pin
X1 aluminum cylinder
X1 set of high engine gaskets

In option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!

Installs on motor scooter PIAGGIO / GILERA Liquid 50cc 2 times:

APRILIA SR (carb) 50 2T LC 2004 (PIAGGIO engine)
ARPILIA SR R (carb) 50 2T LC (PIAGGIO engine)

DERBI GP1 50 2T LC
DERBI GP1 OPEN 50 2T LC
DERBI GP1 REVOLUTION 50 2T LC

GILERA DNA 50 2T LC
GILERA RUNNER SP 50 2T LC before 2005
GILERA RUNNER SP (carb) 50 2T LC after 2006 (C451M)
GILERA RUNNER 50 2T LC

PIAGGIO NRG EXTREME 50 2T LC
PIAGGIO NRG MC2 50 2T LC before 1997
PIAGGIO NRG MC2 50 2T LC after 1998
PIAGGIO NRG 50 2T LC
PIAGGIO NRG MC3 DD 50 2T LC
PIAGGIO NTT 50 2T LC
PIAGGIO NRG Power DD 50 2T LC
PIAGGIO QUARTZ 50 2T LC
PIAGGIO ZIP SP 50 2T LC after 2001
PIAGGIO ZIP SP 50 2T LC before 2000
PIAGGIO Zip sp2 50cc LC

And other models ...

Product Details
477539
New product

Specific References

ean13
3663829037472
You might also like

Reference: 324574

DOPPLER

Cylinder - piston without cylinder head 50cc Ø40mm DOPPLER S1R aluminum scooter PIAGGIO Liquid (NRG, RUNNER ...) before 2006

A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.This cylinder is ideal if you want to keep the original cylinder head. Attention PIAGGIO before 2006 (see breech).

Price €124.99
Attention, may require a delay of more than 20 days!
More
Attention, may require a delay of more than 20 days!
13 other products in the same category:

Reference: 324574

DOPPLER

Cylinder - piston without cylinder head 50cc Ø40mm DOPPLER S1R aluminum scooter PIAGGIO Liquid (NRG, RUNNER ...) before 2006

A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.This cylinder is ideal if you want to keep the original cylinder head. Attention PIAGGIO before 2006 (see breech).

Price €124.99
Attention, may require a delay of more than 20 days!
More
Attention, may require a delay of more than 20 days!