Reference: 01061940
Kit 50cc Ø40mm with AIRSAL Sport aluminum cylinder head for liquid PIAGGIO (NRG, RUNNER ...)
Powerful 50cc kit which is located between the AIRSAL luxury and the T6 but all this at a low price.
Banner
Approved, respecting the 50cc displacement.
Here the small kit high AIRSAL 50cc scooter engine luxury version for PIAGGIO / GILERA. Brand reputation and well-known in the community, one of the best quality / price. This model 40mm diameter will offer slight performance increase compared to the original while maintaining optimum strength.
While it will be more efficient because it has a very correct finish, architecture and work in the channels reviewed and corrected but is primarily an exhaust with bar ... A very good feature to start on a good foundation.
The aluminum cylinder nikasil upscale with its 5 transfers and exhaust with bar. It is accompanied by a yoke also machined aluminum with the best materials, it has a room for incoming better alignment cylinder / cylinder head high compression hemispherical chamber model, polished finish.
Therefore equipped with a high piston mono segment-end and side nipples with 1mm thickness steel end segment to allow more high modes (reduction of frictions), with 2 clips in G and its axis of Ø10mm piston diameter x 33mm length . Its assets? His treatment nikasil aluminum high-end finish and an attractive price! Comes complete with head, pack gaskets, piston, cylinder, exhaust bolts and cylinder head screws ...
We recommend to accompany this cylinder: a carburizing 17,5mm, good setting and a good carburetor adjustment variation, racing cold candle, licensed sports exhaust, a racing oil 2 times 100% synthetic ...
contains:
40mm master cylinder aluminum 5 transfers exhaust with bar.
-Culasse Aluminum incoming high compression chamber.
-piston Mono segment with side grease.
-Segments For steel 1mm thick.
-Clips Piston in G.
Axis-piston Ø10mm X 33mm.
-pack High engine seals.
-Stud Threaded exhaust.
Yoke -Visserie
-Notice ...
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Mounts on PIAGGIO liquid 50cc 2 stroke:
Aprilia SR
ARPILIA SR R
Derbi GP1
Derbi GPI OPEN
GILERA DNA
GILERA RUNNER SP before 2005
GILERA RUNNER SP after 2006
GILERA RUNNER
PIAGGIO NRG EXTREME
Piaggio NRG MC2 before 1997
Piaggio NRG MC2 after 1998
Piaggio NRG MC3 DD NRGPIAGGIO
Piaggio NRG Power DD NTTPIAGGIO
PIAGGIO QUARTZ
Piaggio Zip SP after 2001
PIAGGIO ZIP SP before 2000
And other models ...
Reference: 01061940
Powerful 50cc kit which is located between the AIRSAL luxury and the T6 but all this at a low price.
Reference: 31 8865
A really surprising kit, so that by his power reliability. The must 50cc kit.
Reference: 31 8883
A truly surprising kit, both for its power and its reliability. The must of 50cc liquid kit.
Reference: 251507
A 50cc cylinder without cylinder head old liquid models very solid and inexpensive.
Reference: 31 8884
An ultra-efficient kit reserved for competition in 50cc, very worked diagrams with a very studied architecture!
Reference: 477539
A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.
Reference: 324574
A surprising kit, with excellent quality and finish that will allow you to gain power while being reliable.This cylinder is ideal if you want to keep the original cylinder head. Attention PIAGGIO before 2006 (see breech).
Reference: 9916580
One of the best value for money / solidity, market performance for Piaggio liquid motor scooter.
Reference: KT00112
One of the best price / quality / strength, market performance for scooter Piaggio liquid.
Reference: 030306
A kit without solid breech with performances worthy of the origin, arises with the original breech of PIAGGIO new models (with point towards the back, not with the square heads).
Reference: 31 8523
A high quality 50cc complete cast iron motor of very high quality for PIAGGIO / GILERA motor scooter
Reference: 071600
A very robust and powerful kit for your PIAGGIO / GILERA ... 50cc scooters with liquid cooling.