Banner
Complete kit with reprogramming box for VESPA 300 from 2019 until 2021 (before EURO 5).
High performance MALOSSI kit for VESPA 300 4T from 2019. you should know that as a base, the VESPA 300 4T from 2019 until 2021 (before euro 5) with its 63mm stroke and its 75mm bore, made in reality 278cc real! This kit with its diameter of 75.5mm, increases your displacement to 282cc real and above all, it allows to increase the compression ratio to 12.5: 1! Cooling, reinforcement ... Everything is improved on the kit!
Cylinder
Material: primary aluminum alloy with a high content of quenched and tempered silicon, cylinder liner with application of silicon carbides in a galvanic nickel matrix and crossed smoothing by two diamond passages, with very strict tolerances
Machining: by high precision CNC machine tools
Cylinder-piston couplings with a coupling tolerance of 0.05 mm
Recalculated and enlarged heat exchange surfaces
Piston
Extra compact three-segment
Material: special aluminum alloy with high silicon content with low thermal expansion with application of tin on the sliding walls
CNC machine tool machining
Lightened and reinforced
Enlarged heat exchange surfaces
Segments
Specials with high sliding and very high mechanical resistance
I ° compression segment in nitrided and chromed steel
II segment in special cast iron
Three-piece scraper ring made of special steel, chrome-plated
The box which is delivered to you is the FORCE MASTER 3. It makes it possible to modify the engine carthography in order to have a beautiful injection curve, a good AFR ratio of richness, and to limit the maximum engine speed to 1000rpm.
Technical characteristics :
Carburation adjustment
± 14% at LOW / HIGH / MID
Rev limiter: + 1000 rpm
Exclusion of the speed limiter
8 various maps
Lambda emulator
Temperature range = -20 ° C + 80 ° C
Minimum operating voltage = + 7V
Maximum operating voltage = + 16V
Average absorbed intensity <- 200mA
Environmental protection = IP65
The set should ideally be accompanied by at least a sport variator, a long transmission can be quite pulled!
Mounts on VESPA 300 from 2019 :
VESPA GTS Super HPE 300 ie 4T LC euro 4 2019-> (MA36M)
VESPA GTS Super Sport HPE 300 ie 4T LC euro 4 2019-> (MA36M)
VESPA GTS Super Tech HPE 300 ie 4T LC euro 4 2019-> (MA36M)
VESPA GTS Touring HPE 300 ie 4T LC euro 4 2019-> (MA36M)
VESPA SEI GIORNI HPE 300 ie 4T LC euro 4 2019-> (MA36M)
VESPA GTS HPE 300 ie 4T LC euro 4 2019-> (MA36M)
Reference: 3111393
A powerful kit with a lot of torque. What just to have fun on the track.
Reference: 140.0235
A powerful kit with a lot of torque. Enough to simply have fun on the circuit.
Reference: 3113924
Kit cylinder, complete piston MALOSSI for maxi scooter 4T liquid cooling.
Reference: 3116268
A true concentrate of power and technology which will boost your 125cc 4-stroke engine to the highest point.High complete engine with carthography and camshaft for guaranteed performance.
Reference: 3113958
A little monster that mounts very well with the original crankshaft and breech but that will allow you a considerable performance gain compared to the origin.
Reference: 140.0221
A very good kit 172cc from POLINI delivered with its reprogramming box for your engines PIAGGIO 125/150 4T injection.
Reference: 3113955
A small monster offering torque and power, ready to be mounted without any particular adjustment, for maximum immediate power. Also available with the electronic box MALOSSI FORCE MASTER 2 for always more performances.
Reference: 3116550
A very good 180cc kit from MALOSSI delivered with its reprogramming box for your engines PIAGGIO 125/150 4T injection.
Reference: 3115326 + 5519437
Very efficient 170cc MALOSSI Ø63mm kit for ITALJET DRAGSTER 125 from 2021
Reference: 1A007784
Original PIAGGIO cylinder for the refurbishment of your engine on scooter PIAGGIO MP3, BEVERLY, VESPA GTS, GILERA RUNNER ... 125cc 4T EURO 3.
Reference: 3114621
High performance kit for VESPA LX, LXV .... 125 and 150 4T.
Reference: 5518844 + 3117737
High performance 185cc MALOSSI Ø63mm kit for PIAGGIO MEDLEY 125cc and 150cc 4T EURO 4.
Reference: 31 9990
Excellent kit for ROTAX 125 and 150 4T liquid cooled engine! Guaranteed increase in torque and power!
Reference: 146.0810
A kit very coupleux for your maxi scooter APRILIA 125cc LEONARDO, SCARABEO with engine ROTAX 4T.
Reference: CIL-728
An ideal cylinder / piston for a replacement of your original engine and to circulate every day without worries.
Reference: 3117737
The brand new MALOSSI 183cc Ø63mm kit for maxi scooter PIAGGIO MEDLEY and VESPA GTS euro 4.
|
€308.330
|
delete
|
|
|
The product is no longer available in this quantity.
|
|||
|
€291.660
|
delete
|
|
|
The product is no longer available in this quantity.
|
|||
Complete kit with reprogramming box for VESPA 300 from 2019 until 2021 (before EURO 5).
