• Banner

MALOSSI 218cc kit Ø75,5mm, cylinder / piston / cylinder head / shaft cam + electronic box for Aprilia, Piaggio BEVERLY ...
  • MALOSSI 218cc kit Ø75,5mm, cylinder / piston / cylinder head / shaft cam + electronic box for Aprilia, Piaggio BEVERLY ...

MALOSSI 218cc kit Ø75,5mm, cylinder / piston / cylinder head / camshaft + electronic box for APRILIA, PIAGGIO BEVERLY, ...

3116268

A true concentrate of power and technology which will boost your 125cc 4-stroke engine to the highest point.High complete engine with carthography and camshaft for guaranteed performance.

€974.99
Quantity
Attention, may require a delay of more than 20 days

Description

Always more performance and more solidity ... Here is the high engine which will literally boost your 125cc maxi scooters APRILIA SR, GILERA NEXUS, PIAGGIO BEVERLY, PIAGGIO MP3 YOURBAN and VESPA GTS SUPER. The famous Ø75.5mm kit which is in no longer delivered with its high performance cylinder head, camshaft and the multi-curve electronic computer.

 

kit complet 218 malossi piaggio 4T

 

As usual MALOSSI has made a powerful, solid, torquey and very high-end kit. This little monster will increase your displacement from 125cc to actual 217.58cc of extreme performance.

 

kit malossi culasse cylindre boitier 218cc

 

MALOSSI has found the perfect stroke / diameter ratio for this thermal unit, this cylinder will be easily supported by your original crankshaft.

 

kit complet malossi 218 vespa 4T

 

To shorten it! The large diameter cylinder increases the displacement! The piston offers more compression and less friction! The cylinder head also offers more compression, a better explosion, reworked ducts and large diameter valves with hard springs for better admission, better exhaust and that the high revs follow! The box takes care of freeing the towers to the maximum and reviewing the injection mapping ... The cylinder / piston / cylinder head assembly also offers better cooling!

Kit 218cc MALOSSI Ø75,5mm, cylindre  piston  culasse  arbre à cam + boitier électronique pour APRILIA, PIAGGIO BEVERLY,...


It is already racing in competition and in endurance, that is to say if it has been tested… Force Master 2 is the electronic unit which allows the injection to be changed to adapt perfectly to the new Malossi 4T thermal unit. This unit has been programmed with different programs in order to be perfectly coupled to your vehicle whatever its configuration! With this box 4 curves are offered to you ...

-Courbe 0 - Malossi cylinder - Original exhaust - Original camshaft - Original cylinder head
-Curve 1 - Malossi cylinder - Original exhaust - Malossi camshaft - -Original cylinder head
-Courbe 2 - Malossi cylinder - Original exhaust - Malossi camshaft - Malossi cylinder head
-Courbe 3 - Malossi cylinder - Modified exhaust - Malossi camshaft - Malossi cylinder head

 

kit culasse malossi cylindre 218 piaggio 125

MALOSSI technical description

Cylinder

-Bore Ø 75.5 mm.
- Stroke 48.6 mm.
-Cylinder capacity 217.58cc.
-Increased compression ratio.
-Material: primary aluminum alloy with a high content of quenched and tempered silicon, cylinder liner with application of silicon carbides in a galvanic nickel matrix and crossed smoothing by two diamond passages, with very strict tolerances.
-Machining: by high precision CNC machine tools.
-Cylinder-piston couplings with coupling tolerance of 0.05 mm -Recalculated and enlarged heat exchange surfaces.

Piston

-Extra compact three-segment.
-Material: special aluminum alloy with a high silicon content with low thermal expansion with application of tin on the sliding walls.
-Machine machining
-Tools at CN
-Lightened and reinforced.-Enlarged heat exchange surfaces.

Segments

-Special with high sliding and very high mechanical resistance.
-I ° compression segment in nitrided and chromed steel.
-II ° segment in special cast iron.
-Three-piece scraper segment in special chrome-plated steel.

Cylinder head V4 HEAD

- Head in primary aluminum alloy cast by gravity, improved and sandblasted and worked on super precise CNC with tolerance to the thousandths.
-Valve guide with recalculated profile, obtained by powder sinterization process (steel, phosphorus, carbon, copper and manganese).
-Seat of the valves in steel alloy, cobalt, molybdenum and copper with special thermochemical treatment.
- Inlet valve increased to ø 25 in special steel bonded by thermochemical treatment.
-Exhaust valve increased to ø 22.2, material Nimonich 80 (alloy of nickel, chrome, titanium and aluminum).
- Intake and exhaust spring in pre-hardened and stabilized chromium-silicon steel with recalculated load good for the increase of engine power.

Power Cam

-Studied with Cad-Cam system.
-Elaborated with extremely precise machines.
-100% controlled by measuring instruments of the order of a tenth of a micron.
-Studied and produced to give your scooter a typically sporty character that will allow you to move with agility in urban traffic and to face long journeys at high cruising speeds.
-In addition, a considerable increase in torque will allow you to achieve absolutely exceptional acceleration and uphill thrust.

Electric case

-Adjustment of carburetion.
- ± 20% at min / medium / max.
- Lap limiter: + 1000.
-RPM 4 different programs.

 

haut moteur complet malossi 218 piaggio 125 vitesse

Mounts on:


APRILIA APRILIA SR MAX 125 ie 4T LC euro 3


GILERA GILERA NEXUS 125 ie 4T LC euro 3


PIAGGIO PIAGGIO BEVERLY 125 ie 4T LC euro 3 2010-> (QUASAR)


PIAGGIO PIAGGIO MP3 YOURBAN 4V 125 ie 4T LC euro 3 2011->

 

PIAGGIO PIAGGIO X7 EVO 125 ie 4T LC euro 3 (QUASAR)


VESPA VESPA GTS Super 125 ie 4T LC euro 3 2014-> 2016


VESPA VESPA GTS Super 125 ie 4T LC euro 3 <-2013 (M455M)

 

kit malossi avec culasse 218cc piaggio mp3 125

 

ATTENTION : this reference is compatible with vehicle models up to 2013!

Product Details
3116268
New product
You might also like
16 other products in the same category: