• Banner

carburetor kit MALOSSI MHR PHBH Ø26mm with valves, pipe, filter, tap ... for mécaboite minarelli am6 & DERBI euro 1,2 & 3
  • carburetor kit MALOSSI MHR PHBH Ø26mm with valves, pipe, filter, tap ... for mécaboite minarelli am6 & DERBI euro 1,2 & 3

Kit carburation MALOSSI MHR PHBH Ø26mm with valves, pipe, filter, tap ... for mécaboite minarelli am6 & DERBI euro 1,2 & 3

1613522

A superb 26mm competition carb kit very complete with high-end equipment!

€266.66
Quantity
Shipping in 1-3 days

Description

The new carburetor kit from the MHR group from MALOSSI is a real monster! This model is 26mm in diameter, for this pack, MHR has simply chosen all the best accessories from the world of competition. This pack is installed on am6, derbi euro 1, 2 and even euro 3 engines, it is reserved for the most advanced engines: be it run, competition, endurance…

It is used for the MHR GP 80 trophy cup. Malossi has selected the large 26mm PHBH round bushel carburetor from Dellorto, this PHBH model is a safe bet at all levels! It offers more high speeds than the VHST models, it offers less openness and recovery than the flat bushel models but it is more longitudinal and high speed and again, everything is relative…

It also depends on the cylinder used! In general, we recommend flat plug carburettors on bar cylinders, round bushels on normal exhaust cylinders, to boost… This carburetor is of high quality and it is already very famous in all competitions. MHR has thought of everyone by supplying the famous MALOSSI MHR E14 30 ° air filter! This filter offers very good performance and goes everywhere. It allows you a 100% perfect filtration thanks to a high quality expanded polyurethane foam. Same aesthetic level, this filter is at the top!

This pack then contains a large volume petrol outlet machined from the mass of aviation aluminum machined purple for the cap! This fuel outlet is universal in size (on booster, 50cc a box for the most part), it also has a fuel filter for more engine safety. The tap / carburetor hose is also delivered! For the rest, MHR has chosen its famous intake pack, a ventonized adjustable viton pipe perfectly aligned with the VL15 or VL6 valves. The valves supplied are the famous MALOSSI MHR VL6 which have good, high quality 0.35mm carbon strips. Obviously the collars, seals ...

are delivered in this pack. A super complete and very high quality kit preset, what more could you ask for! It is certainly expensive but at least, with such a kit, performance, quality, safety, recovery…. Will be present. The pack even contains a plug to be placed on derbi engines so that the carburetor tank does not hit against the original gearbox oil plug.

The pack contains :

X1 PHBH Dellorto carburetor round bushel
X1 hose
X1 machined petrol tap c aviation aluminum
X2 necklaces
X1 complete screws
X1 derbi gearbox oil cap
X1 cap seal
X1 filter cone E14 cut 30 °
X1 vl6 valves
X1 complete adjustable glass pipe

MALOSSI description :

Malossi feeding system


The biggest innovation of these new Malossi carburetors is the modular manifold. It allows the sleeve to be turned in the flange according to the specific requirements of its own vehicle, in order to determine the best angle for mounting the carburetor.

Especially studied and calibrated systems for unbridled motors, supplied with all the accessories necessary for mounting.
MALOSSI is a leading company in the design and production of special power systems for motorcycles and scooters.
MALOSSI installations are the result of in-depth studies, precise drawings and calculations. The suction ducts, the lamellar valves, the air intake, designed by MALOSSI are subjected to performance tests and distribution checks which test their performance and reliability.
The carburetors are specially customized for each vehicle based on the characteristics of the engine and the air intakes, in addition to the total calibration of the carburetor which affects all the elements concerned by the metering of the air-petrol mixture on all engine speeds. power distribution.
MALOSSI produces special components for power systems in order to provide a product that perfectly meets the needs of the most demanding user.

Product Details
1613522
20 Items
New product
You might also like
5 other products in the same category: