• Banner

Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminum DERBI euro 1 & 2
  • Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminum DERBI euro 1 & 2

Kit 94cc Ø50mm BIDALOT FACTORY RACING 2014 (& label) aluminum DERBI euro 1 & 2

11000974

New in 2014, a real powerhouse for DERBI euro 1 & 2.

Engine preparation
Quantity

Description

The presented version is pictured FACTORY. Reserved only for circuit racing.

2014 Big news !!! Here is the new top BIDALOT RACING FACTORY 94cc engine Ø50mm diameter for DERBI euro 1 and euro 2 Available in Version FACTORY or FACTORY LABEL (prepared directly from Bidalot), this kit reaches the capacity of 94cm3 with the crankshaft (mandatory fitting with it ) race 48,00mm ref. 12100972. Developed and studied by BIDALOT, this set is specially designed for circuit competitions, runs ....


vue Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

What he has been more compared to the old version of 94cc? In fact many changes were made ​​as the 6 transfers and exhaust to strip corrected and revised upwards. All adapted to the new 50mm bore diameter. These changes were well on a single goal, always optimize more power at high rpm while maintaining maximum torque and power at low and mid range.

transferts Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

Its piston is a top racing model mono segment range special long stroke (51mm length) which will reduce friction and therefore increased high speeds. It has a new profile and is equipped with a ground-end chrome steel curved segment, its axis 13 X 40mm and reinforced clips. Delivered 100% complete, you will have full pack seals with different base gasket thicknesses and an aluminum base plate wedge 4mm thickness allowing you to tweak your settings at the squish.


culasse piston Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

Another addition to this high engine was brought directly into the design of the cylinder which is seen adding 4 fixing screws for the cylinder head stud. The cylinder is obviously still in aluminum with its specific treatment and coating nikasil. The cylinder head stud preserves its high compression combustion chamber and is accompanied by the famous blue head cover billet.


barrette Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

A needle cage Ø13 X Ø17 X 17.5mm comes with all the fastenings required for assembly of this kit. A leaflet in French accompany you in the assembly with the recommendations of the brand BIDALOT for calibration of high engine as well as the specifics of the version of LABEL. This latest version (LABEL) is available with an average delay of another month.


échappement Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

Why so long? For the simple reason is that the top engine is completely modified by the brand of running service. Preparations Account drop handmade and special machine at the foundry cylinders. This preparation for the craziest of you has a multitude of changes are:

-Changes Distribution heights
-Modification And optimization scans angles (horizontal & vertical)
-modification Of the height and shape of the light / exhaust outlet
-Prepare The cylinder skirts
-Optimization The geometry of the "hollowed" of the exhaust strip
-Metrology And pairing cylinder / piston optimized
-Retouche Segment of beaks
-Check And the game Adjustment segment Cup
-Numérotation Of each cylinder for unique, genuine and verifiable preparations (to prevent copying and preparation dubious nickname Label ...).
-This LABEL version does go up with the crankshaft Racing Factory race 48,00mm (ref. 12100972)

Before adding to cart, be sure to select the desired version.

admission Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

BIDALOT This pack contains:

Aluminum master cylinder diameter Ø50mm 6 transfers with big exhaust with bar
Blue aluminum cylinder head -Couvercle
Yoke -Plot
-piston Mono segment Ø50mm
-Segment Chrome steel Ø50mm X 0,8mm thick
Axis-piston internal external Ø13mm X 40mm X length Ø9mm
Piston -Clips Type C for axis Ø13mm X 1mm thick material
-Cage Needle internal external Ø13mm X Ø17mm X 17.5mm length
-X4 Studs reinforced M7 X 114mm length
-X4 Breech nut reinforced M7
Stud fastening -Visserie and head cover
-Cale Of machined aluminum base
-X7 Breech ring seals
-X7 Aluminum base seals with different thicknesses
Mounting the high engine -Notice
-certificate Authenticity of the cylinder (provides in the case of a label prepared cylinder BIDALOT)
-Autocollants

plot culasse Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

We recommend to accompany this pack 94cc engine with top: a flexible mount for big carburetor carburetor carburetor Ø34mm, competition NGK R6252E105, exhaust Factory Racing 88 / 94cc specially designed to be assembled with the motor, ignition advance with Racing Factory variable internal rotor without lights, crank Racing Factory long race 48,00mm, oil motor racing 100% synthetic ....

montage Kit 94cc Ø50mm BIDALOT RACING FACTORY 2014 (& label) aluminium DERBI euro 1 & 2

Product Details
11000974
New product

Data sheet

Lumière d'échappement
With bar (2 parts)
Diameter (Ø):
Ø49.995mm
Matière
Aluminium
Recommended squish:
Between 0.75 to 0.95 mm depending on the fuel used
Refroidissement
Liquid
Displacement:
94cc
Echappement
flange between axis fixing 50mm
Nombre de transferts d'admission
6 transfers
Cylinder head:
A stud (2 parts) hemispherical
Nombre de segment
Mono-segment (1 segment)
Course
For 48.00mm stroke / 95mm connecting rod
Transferts a l'embase
Large transfers (work of the original casings necessary)
Needle cage:
Ø13 X 17 X 17.5mm
You might also like
9 other products in the same category: