Reference: 01137550
88cc kit Xtrem AIRSAL red Ø50mm (special race 45mm rod 85mm) for minarelli am6
The most powerful kit of AIRSAL house for minarelli am6! This XTREM version must be accompanied by adequate 45mm stroke crankshaft!
Banner
Here is the complete high engine kit 80cc BIDALOT FACTORY RACING for mécaboite minarelli am6. Available in standard or label the choices, this high engine will be ideal to participate in runs, FFM races or other events on the circuit.
With a study, design and highly developed architecture, this kit is left of the high-end market. Indeed, straight out of the famous pack Factory 80cc with crankshaft, it is originally intended to be assembled with the crankshaft in 44,90mm race but with the crankshaft race 44,00mm (Pack of Crankshaft BIDALOT Racing 80cc FFM) which it will provide a multitude of changes (cylinder head gasket plane, machining, hold ...).
You will find a wealth of information technologies in product literature as a downloadable version for these changes, the various coasts and patterns. Returning in the heart of the matter is that this cylinder.
With 6 admission transfers, Ø47,6mm diameter bore with special coating and nikasil treatment, exhaust bar has large diameter, a breech block (two-part) equipped with a high-compression combustion chamber and anodized blue lid size in the mass.
BIDALOT has forgotten nothing, here we have such a concentration of knowledge and application performance is outsized. Whether a couple, midrange and top-end ... you will not lose a crumb of power has every shot acceleration. Further, a forged piston racing with silicon treatment team this cylinder. With his segment chrome steel / ground glass domed, its music and its axis diameter Ø12mm X 39mm reinforced.
Delivered 100% complete with a set of base of different thicknesses joined to make your squish, a set of bolt-ring seals, all necessary hardware for installation, set of 4 pins 110mm reinforced with specific nuts, notice, stickers ....
Finally, you have version FACTORY LABEL also pack in a select before adding to cart. It is a real extra preparation made in their race BIDALOT service. This preparation includes a modified intake modified scans of angles and optimized with an exhaust port reviewed and revised upwards, a piston and segment also reviewed and improved.
All this is realized during the machining of the cylinder before coating nikasil thereby avoid weakening these changes. All LABEL cylinders are numbered to avoid nickname preparation of the brand, doubtful. You will understand, whether in single or Label, BIDALOT has not done in half measures and performance are the appointment, it is not a show!
Reference: 01137550
The most powerful kit of AIRSAL house for minarelli am6! This XTREM version must be accompanied by adequate 45mm stroke crankshaft!
Reference: 53450.00
A great performance kit, 110cc monstrosity for your minarelli am6 !!! For long race 46mm rod size but original 85mm!
Reference: 30434.M3
An overpowering 90cc kit with high-end materials and extreme strength!
Reference: CK.44.849.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and connecting rod 90mm 44,00mm only.
Reference: 9924230
The spare kit for the maxikit TPR 44mm stroke on mécaboite Minarelli AM6.
Reference: EQ-998-43
The famous 50mm (80cc) aluminum BARIKIT Racing race but special 43mm version sapphire piston and cylinder head stud! A powerful cylinder made with a good engine configuration. Motorcycle with 50cc minarelli am6.
Reference: 9921760
The TOP PERFORMANCES 85cc cast iron kit for minarelli AM6. This cylinder is also the spare cylinder for the maxikit with crankshaft on the am6 engine of your mécaboite.
Reference: 53470.00
The biggest kit in the world for minarelli am6 !!! Ø55mm, for 46mm stroke / 90mm connecting rod! We are a monster couple.
Reference: 133.1012
POLINI 100cc kit to install with 44mm stroke crankshaft, 95mm connecting rod and 13mm axle.
Reference: CK.44.952.G14
High competition engine for minarelli am6! Special race 44, 95cc Ø52mm kit, 6 transfers, large 32mm exhaust, .... A real powerhouse, to be accompanied by a 44.00mm long stroke crankshaft and 85mm connecting rod. This is the biggest kit of the ITALKIT packs.
Reference: EQ-974-S
The direct competitor of the AIRSAL X-TREM, it has a stud bolt, a sapphire blue treated piston .... A complete kit of quality, special long stroke 45mm.
Reference: CK.44.848.GR2
Top racing engine minarelli am6! Special race 44, 80cc kit Ø48mm, 6 transfers, large 32mm exhaust .... A real powerhouse, to accompany a long-stroke crankshaft and rod 85mm 44,00mm.
Reference: CK.44.852.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!