• Banner

Kit 88cc BARIKIT BRK Ø50mm aluminium (special race 45mm) for minarelli am6
  • Kit 88cc BARIKIT BRK Ø50mm aluminium (special race 45mm) for minarelli am6

Kit 88cc BARIKIT BRK aluminum Ø50mm (special 45mm stroke) for minarelli am6

EQ-974-S

The direct competitor of the AIRSAL X-TREM, it has a stud bolt, a sapphire blue treated piston .... A complete kit of quality, special long stroke 45mm.

Stage 1 engine preparation
€233.33
Quantity
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Description

Reserved only for competition on the circuit, high engine not approved for public roads.

Here is the BRK Competition 88cc thermal unit in diameter 50mm. Like the AIRSAL Xtrem Red, it has a special 45mm stroke. This cylinder / piston and stud bolt offers maximum performance at all levels, it is solid, reliable and efficient! It is designed to be installed exclusively with a 45mm stroke crankshaft, original size 85mm connecting rod such as the special 88cc AIRSAL or BARIKIT 45mm stroke crankshaft. In addition to this, you need to know more about it.

vue Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

With its 50mm bore diameter and special 45mm stroke, it develops no less than 88.35cc real. In terms of intake transfers, this aluminum cylinder has 5 including 4 lateral and one at the rear with a specific architecture with two internal cylinder lubrication, the front side transfers are designed to pass under the exhaust, the The base is also well designed to offer more performance and improved sweep / fill, you will need to better align the crankcases to the cylinder to develop all the power of this kit. In addition to this, you need to know more about it.

zoom cylindre piston Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

BARIKIT being one of the largest piston manufacturer, this cylinder is equipped with a sapphire blue model single segment piston (blauzafir), so it has a blue graphite treatment. We regret the absence of a preparation on the rear piston to optimize the sweep. This piston still allows high speeds with its fine chrome steel segment (reduced friction).

sortie échappement Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

The Ø32mm exhaust outlet is therefore a very wide model with internal bar, an exhaust wedge for a 28mm diameter passage is provided. This racing version is also equipped with the famous cylinder head which can be broken down into two parts (stud bolt), the latter offers better cooling and therefore obviously additional performance, the stud is an incoming model to preserve a well-centered combustion chamber. The combustion chamber is a high compression frustoconical version, polished finish.

échappement Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

In summary, it is a very good kit, excellent quality / price ratio, the performances are there especially at high speed, it is the maximum power which is aimed without neglecting a crumb of torque.

transferts Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

We recommend accompanying this kit with at least: Ø28mm carburetion, 45mm BARIKIT stroke crankshaft or other with reinforced C4 and / or Celeron bearings, unbridled or competition ignition, racing exhaust suitable for high BRK diagrams, cold racing spark plug, racing 100 engine oil % quality synthesis ....

montage Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6 course 45


This pack contains:

-Aluminum cylinder Ø50mm 5 transfers with large bar exhaust
- Two-part decomposable aluminum cylinder head
-Piston mono segment Ø50mm sapphire blue
-Segment fine chromed steel
-Piston pin
-C type piston clips
-Exhaust wedge Ø32 to Ø28mm
-Pack of engine seal
-Information notice and assembly
- Screws, washer ...

zoom Kit 88cc BARIKIT BRK aluminium Ø50mm minarelli am6

As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

This high engine is mounted on the following 50cc motorcycles with gearboxes equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines passed in DERBI euro 3)

-BETA CRE

-BETA RR
-BETA RR ALU

-HONDA HM
-HONDA CRE
-HONDA BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

- PEUGEOT XP6
- PEUGEOT XPS
- PEUGEOT XP STREET
- PEUGEOT XP STREET EVO
- PEUGEOT XR6
- PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
EQ-974-S
New product

Specific References

ean13
8435031130662
You might also like
13 other products in the same category:

Reference: EQ-998-43

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm aluminum BARIKIT Racing (special racing 43mm) for minarelli am6

The famous 50mm (80cc) aluminum BARIKIT Racing race but special 43mm version sapphire piston and cylinder head stud! A powerful cylinder made ​​with a good engine configuration. Motorcycle with 50cc minarelli am6.

Price €216.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: CK.44.952.G14

ITALKIT

ITALKIT Racing aluminum 95cc kit Ø52mm special 44mm stroke 85mm rod and 14mm axle for minarelli am6

High competition engine for minarelli am6! Special race 44, 95cc Ø52mm kit, 6 transfers, large 32mm exhaust, .... A real powerhouse, to be accompanied by a 44.00mm long stroke crankshaft and 85mm connecting rod. This is the biggest kit of the ITALKIT packs.

Price €246.66
Attention, requires a period of more than 20 days!
More
Attention, requires a period of more than 20 days!