• Banner

Kit 70cc Ø47,6mm ATHENA Racing aluminum minarelli am6
  • Kit 70cc Ø47,6mm ATHENA Racing aluminum minarelli am6

Kit 70cc Ø47,6mm ATHENA Racing aluminum minarelli am6

P400130100001

An unbeatable value for money, great power ... Even no need to prep, aligned with the original covers! Works great on small configuration.

Engine preparation
€191.66
Quantity
Requires a delay of more than 20 days!

Description

Not approved on the public highway, only reserved for the competition, in any case does not respect the rules of the road!

 

The famous ATHENA racing kit for minarelli am6, already well known of all it is really cheap in relation to its benefits, for that price, no other kit arrives him at the ankle. Let's start with the cylinder, it is aluminum and treated nykasil upscale obviously, transfer pipe and forms studied in number 5 (lateral 4 and 1 rear), a large exhaust with bar designed for power / torque / high speed / longevity, it is pre-rehearsed and very well finished, 47,6mm diameter. The top of the cylinder is specially turned / machined to the stud bolt.

 

 

The stud bolt has been heavily studied too, a handy mini round pad for those who will want to redo different, the chamber is polished tapered, high-end aluminum carved mass for better cooling. The piston is treated money with high silicon content, it is prepared kit for better scanning and mono segment, its cap is 100% flat, the segment is based chrome domed s10 for good high speed with less friction. With its diameter of 47,6mm, its 39mm stroke cylinder capacity of 69,40cc. The expected compression ratio is 14.1: 1. For your squish, several joints of base plate are delivered, attention, you must obtain a squish 0,9mm 1kg with a tightening of the cylinder head nuts! In short this kit will know you do achieve good power, torque and senior incredible regimes. The strength is very good thanks to its rather thick strip and solid treatment.

 

 

We advise this kit with at least: reinforced crankshaft, reinforced bearings, carburation 21mm, exhaust racing (ATHENA exhaust squeezed a good marriage), cold candle racing, 100% synthetic oil mixture, removing the oil pump.

 

Optionally, we offer a preparation STAGE 1, this preparation includes a selection of the best part of our stock, a marked improvement in form and exhaust timing and a special touch to the skirt of the cylinder and piston for better scanning / filling according to our best essays. Improved lubrication and cooling bar (cross type) is made ​​in passing to the plans obtained after preparation. This prep requires an additional period of 2 to 15 days depending on our availability! It requires tooling and around 4 to 5 hours working on this cylinder. The price is accordingly.

 

Package includes:

Cylinder

Joints

Cylinder head

Cylinder head stud

Segment

Piston Clips

Piston

Piston Pin

guaranteed athena

notice athena

 

 

Fits the 50cc motorcycles gearbox equipped minarelli am3, am4, am5, am6 euro 1 am6 euro 2:

 

Aprilia RS 50cc am6 from 1997 to 2006 (new attention after 2006 engine derbi euro 3)
Aprilia RX am6 engine (new attention after 2006 engine derbi euro 3)
Am6 APRILIA MX engine (new attention after 2006 engine derbi euro 3)
Aprilia Tuono 1997 am6 50cc engine 2006 (new attention after 2006 engine derbi euro 3)
BETA RR
BETA RR ALU
BETA CRE
HM HONDA
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
Peugeot XPS
MOTORHISPANIA RYZ
Peugeot XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
Peugeot XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RS2 RIEJU
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
SMX RIEJU
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO

 

And many other machines!

Product Details
P400130100001
New product

Data sheet

Nombre de transferts d'admission
5 transferts (comme l'origine)
Matière
Aluminium
Diameter (Ø):
47.6mm
Refroidissement
Liquid
Transferts a l'embase
Like the origin (aligned to the original casings)
Lumière d'échappement
With bar (2 parts)
Compression ratio:
14.1:1
Nombre de segment
Mono-segment (1 segment)
Cylinder head:
A stud (2 parts) tapered
Cylindrée réelle
69.40cc
Echappement
Ø 25 + 28mm (comme origine euro 1 er 2)

Specific References

ean13
8050444896938
Attachments
Download
Assembly instructions kit ATHENA

Descriptive, informative and assembly instructions for ATHENA high engines on the minarelli am6 engine which equips 50cc motorcycles.

Download (0)
You might also like
16 other products in the same category:

Reference: EQ-987-S

BARIKIT

Kit 80cc Ø50mm aluminum BARIKIT Racing minarelli am6

A large diameter 50mm durable aluminum with 5 transfers and exhaust with bar, incoming high compression type of cylinder head. 50cc motorcycle equipped with the engine minarelli am6. Assured performance!

Price €195.83
Shipping in 7 to 12 days depending on arrivals BARIKIT
More
Shipping in 7 to 12 days depending on arrivals BARIKIT

Reference: 01134950

AIRSAL

Kit 80cc Ø50mm AIRSAL luxury aluminum minarelli am6

A large diameter 50mm aluminum at a low price! This AIRSAL luxury version 80cc offers a lot of torque to the engine minarelli am6, compared to the original version, it has a piston high-end segment!

Price €158.33
Shipping in 1-3 days.
More
Shipping in 1-3 days.

Reference: EQ-1034-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm BARIKIT BRK Racing 2 aluminum cylinder head minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €241.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals