Banner
The latest kit from bidalot special for am6.
Attention, prohibited on the road, reserved only for competition.
Here is the latest cylinder from BIDALOT in 70 cm3 for your Minarelli AM6. This cylinder is really a huge step forward for the AM6 engines. Everything has been reviewed and improved to increase the performance and reliability of the cylinder. This cylinder is composed of 7 transfers in all. 4 intake 3 sweep and 3 exhaust. The booster exhaust will offer you more solidity than a bar exhaust and it will allow you a very good high speed thanks to a maximum opening in width of the exhaust. The cylinder head is a machined block model which is not studded, however the cooling has been so well reviewed that it is therefore not necessary to do it in 2 parts. With such an architecture it is as powerful as an 80 cm3 AM6 MHR for example while being more nervous. As usual, BIDALOT does things well by including reinforced studs, cylinder head nut, screws, etc. However, we regret that the needle cage is not delivered with it. The cylinder comes with several exhaust adapters to mount it on 90% of exhausts on the current market. Have
This pack contains:
x1 cylinder
X1 mono segment piston
X1 segment Chromed steel Ø47.6, domed ground, made in Japan
X1 piston pin in 12x39mm
X1 full seal pack
X4 Reinforced cylinder stud
x4 exhaust screw
x4 cylinder head nuts
X1 cylinder head
X1 exhaust flange Ø28mm x L30mm
X1 exhaust flange Ø30mm x L30mm
X1 exhaust flange Ø32mm x L30mm
This high engine is mounted on the following 50cc motorcycles with gearbox equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:
-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of engines upgraded to DERBI euro 3)
-APRILIA RX AM6 engine (after 2006, beware of engines upgraded to DERBI euro 3)
-APRILIA MX AM6 engine (after 2006, beware of engines upgraded to DERBI euro 3)
-BETA CRE
-BETA RR
-BETA RR ALU
-HONDA HM-HONDA CRE
-HONDA BAJA
-HUSQUVARNA WXE
-HUSQUVARNA CH
-HM DERAPAGE-HM CRE
-MALAGUTI DRAKON
-MALAGUTI XTM-MALAGUTI XSM
-FANTIC CABALLERO
-PEUGEOT XP6-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6-PEUGEOT XR7
-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX
-RIEJU RS1-RIEJU RS2
-RIEJU RS2 MATRIX - RIEJU RS2 MATRIX PRO - RIEJU SMX
-RIEJU MRX-RIEJU SPIKE
-KEEWAY TX EN
-YAMAHA DT-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER
-SHERCO SM-SHERCO ENDURO
-SHERCO HRD-SHERCO ENDURO
And many other machines!
Reference: EQ-752
The famous 7 transfers cast iron Ø47mm 50cc motorcycle engine minarelli am6, comparable to FURYTECH but less torquey, powerful and stronger!
Reference: EQ-715
The famous 7 Ø47mm cast iron transfers with oval exhaust for minarelli am6 engine, Sport 1 version with single monoblock cylinder head in frustoconical shape, thicker segmentation ....
Reference: KT00114
Powerful, solid, inexpensive, ideal for starting a good little configuration on the am6 engine. Identical to TOP BLACK, also manufactured at MOTORPARTS!
Reference: 53430.00
One of the most powerful kits 80cc markets original race.
Reference: 01301150
The only big diameter kit available on the market for CPI Supercross, Supermoto, SM, SMX ... Ideal to speak your bike 50cc CPI!
Reference: 10059909
A high complete aluminum engine, efficient, solid and reliable, a real power monster little known to the general public.
Reference: 075700
The ATHENA sport is certainly the best aluminum for a small budget, of very high quality, it is solid and very efficient! A perfect torque / power ratio.
Reference: EQ-1034-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head with bi-part stud! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
Reference: P400130100007
A very solid, rare and efficient kit taken from the mold of the famous ATHENA kit with exhaust valve!
Reference: P400130100001
An unbeatable value for money, great power ... Even no need to prep, aligned with the original covers! Works great on small configuration.
Reference: 133.1008
One of the rare competitors at the height of the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to accompany a good configuration!
Reference: 9924130
A high-performance aluminum engine kit 80cc in diameter 50mm, large exhaust, 5 transfers.
Reference: CK.44.780.GR2
The direct competitor of MALOSSI MHR TEAM cylinder with its 308-3 GILARDONI (Special skirt exhaust has boosters, 6 transfers), the cylinder head has stud, its very well defined diagrams ... For am6!
Reference: EQ-921-S
Top BARIKIT aluminum engine with 5 transfers, piston mono segment, exhaust with bar and incoming high compression cylinder head. Guaranteed performance!
Reference: EQ-781
A large diameter 50mm in cast iron 7 transfers and exhaust has boosters! For 50cc motorcycle equipped with the minarelli am6 engine. Identical to the 80cc FURYTECH kit which is no longer available on the market!
Reference: EQ-905-S
The famous 50mm (80cc) aluminum BARIKIT BRK Racing with incoming high compression combustion chamber cylinder head! A high-performance cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....
The latest kit from bidalot special for am6.
