• Banner

Kit 80cc Ø50mm ATHENA Replica minarelli am6 aluminum
  • Kit 80cc Ø50mm ATHENA Replica minarelli am6 aluminum

Kit 80cc Ø50mm ATHENA Replica aluminum minarelli am6

P400130100007

A very solid, rare and efficient kit taken from the mold of the famous ATHENA kit with exhaust valve!

Stage 1 engine preparation
€208.33
Quantity
Shipping in 1-3 days

Description

Not approved on public roads, only reserved for competition, does not respect the highway code in any way!


Here is the ATHENA Replica 80cc Ø50mm kit, this famous cylinder has taken the mold and the architecture of the famous ATHENA kit with exhaust valve! This kit is made of good quality aluminum with a very high end nykasil chrome treatment, the finish is excellent. The diagrams are also very good, this kit is wedged between torque and high speed, but unlike the other kit (ATHENA with valve), this one is removed from the valve exhaust system.

 

 

This kit is known to do a lot of miles for an aluminum, certainly even the strongest aluminum that has been seen on am6 in 80cc. Its piston is in mono segment end hard chrome domed to allow the highest speeds and avoid friction. The cylinder head has a high polished tapered compression chamber. The seals are also of excellent quality, ATHENA is also a large seal manufacturer and recognized throughout the world. The exhaust has a special anti-wear / improved scavenging shape.

In conclusion, it is a very solid and efficient aluminum kit that can be used for driving every day (except France because it is not approved for road), for stunts, etc. Aesthetic level, it is relatively sober, it takes the original shape in a cleaner, beautiful metallic gray and it is marked ATHENA in 3D. We will also really appreciate the several base joints in order to polish your squish, moreover for beginners, the instructions explain how to make the squish and understand it. We recommend it with at least: reinforced bearings, reinforced crankshaft, 21mm carburetion, racing exhaust, cold competition spark plug

 


Characteristics:

Bore (Ø cylinder): 50mm
Displacement: 80cc in 39mm stroke (original)
Compression ratio: 13.9: 1


The pack contains:

-cylinder 5 normal exhaust transfers in chrome treated aluminum from nykasil d.50mm
- high quality chrome domed end segment d.50mm
-piston mono segment reinforced d.50mm
- reinforced piston pin (original diameter)
-clips (axis rods) in C
-pack full reinforced seal
-exhaust wedge (euro 1 to 2)
- cylinder head screws
-tapered cylinder head d.50mm high compression polished chamber
-sticker
- ATHENA booklet
-ATHENA assembly instruction in French / Spanish / Italian / English

 

 

As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine:

APRILIA RS 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (attention news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (new attention after 2006 in derbi euro 3 engine)

BETA RR
BETA RR ALU
BETA CRE

HONDA HM
HONDA CRE
HONDA BAJA

HUSQUVARNA WXE
HUSQUVARNA CH

HM DERAPAGE
HM CRE

MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM

FANTIC CABALLERO

PEUGEOT XP6
PEUGEOT XPS

MOTORHISPANIA RYZ

PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6

MOTORHISPANIA RX

PEUGEOT XR7

MOTORHISPANIA RX-R

RIEJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE

KEEWAY TX FR

YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER

SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO

And many other machines ...

Product Details
P400130100007
4 Items
New product

Specific References

ean13
8052204232758
You might also like
16 other products in the same category:

Reference: EQ-987-S

BARIKIT

Kit 80cc Ø50mm aluminum BARIKIT Racing minarelli am6

A large diameter 50mm durable aluminum with 5 transfers and exhaust with bar, incoming high compression type of cylinder head. 50cc motorcycle equipped with the engine minarelli am6. Assured performance!

Price €195.83
Shipping in 7 to 12 days depending on arrivals BARIKIT
More
Shipping in 7 to 12 days depending on arrivals BARIKIT

Reference: EQ-1033-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm BARIKIT BRK Racing 2 aluminum minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with high compression cylinder head incoming combustion chamber! A very powerful cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €216.66
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals

Reference: EQ-905-S

BRK Competition Systems By BARIKIT

Kit 80cc Ø50mm aluminum BARIKIT BRK Racing Minarelli am6

The famous 50mm (80cc) aluminum BARIKIT BRK Racing with incoming high compression combustion chamber cylinder head! A high-performance cylinder with 5 transfers worked, big exhaust with bar, piston mono segment ....

Price €208.33
Shipping in 7 to 12 days depending on BARIKIT factory arrivals
More
Shipping in 7 to 12 days depending on BARIKIT factory arrivals