• Banner

Kit 75cc Ø48mm ITALKIT Competition Sport aluminium minarelli am6
  • Kit 75cc Ø48mm ITALKIT Competition Sport aluminium minarelli am6

Kit 75cc Ø48mm ITALKIT GILARDONI Competition SPORT minarelli am6 aluminum bi-segment

CK.44.748.G1

GILARDONI cylinder 308 (oval exhaust) resistant aluminum with 6 transfers, VERTEX two segments piston, oval exhaust and improved cylinder head high compression mono block. A concentrate of performances.

Stage 1 engine preparation
€188.33
Quantity
Attention, requires a period of more than 20 days!

Description

Top unapproved engine to the public road, only reserved for the competition on the track, road closed.

Here are the top complete engine 75cc diameter Ø48 mm 39,20 mm in normal race (as the origin) of the great ITALKIT brand for mécaboite Minarelli AM6 engine. The brand as usual, proves these quality parts, its desire to offer the exceptional material for all drivers and enthusiasts.

vue Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

This aluminum cylinder Ø48 mm (model GILARDONI 308) has a specific heat treatment with internal coating consists of silica & niquel. It offers a real displacement 70,89cc. A high range consists of ensuring strength and reliability. With 6 transfers of admission and optimized oval exhaust port. All with a perfect finish and architecture allowing maximum performance. An exhaust ring is provided, for passing the exhaust of a Ø28 diameter to 25mm or vice versa.

piston Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

In addition, this cylinder is accompanied by a two segment piston in VERTEX. Suffice to say the material of the highest quality whose reputation and quality is more to discuss. The piston is equipped with 2 chrome segments for 1mm thickness favoring the times and torque without neglecting the ramp-up by reducing friction purposes segments.

transferts Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

With the heat treatment of the piston, forms and composition, it was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal change plans and a prolonged endurance on circuit, extreme conditions.

culasse Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

Finally, a single cylinder block (one part) is supplied with the cylinder. She also manufacture excellent and beautifully engraved with the brand name laser on the cover. Mag model for better heat dissipation, a better cooling and therefore better performance.

échappement Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

Model mounted on incoming and o-ring for more pre compression. The tapered shape of combustion chamber, polished finish is also seen in improved and optimized with a compression ratio revised upwards. A set along very well suited for the cylinder.


Obviously delivered complete as presented, you will not be disappointed in any of this material, which guarantees extreme reliability (provided as a perfect fit), a quality / price indisputable.

We advise you to accompany this high engine with at least: a carburizing see 21 24 Soft mounting an intake kit, reinforced crankshaft bearing, internal rotor ignition without lights, cold candle racing, motor racing oil, exhaust relaxing racing ....

contains:

-cylinder Ø48 mm aluminum 6 transfers with oval exhaust
-Culasse Aluminum mono block polished truncated combustion chamber
-piston Bi segment VERTEX high silica content
-2 Steel segments for chrome 1mm thick
Axis-reinforced piston Ø12 X 37mm
Crab-like piston -Clips
-pack Complete joint
-Bague Exhaust
-Notice
-Autocollant

zoom Kit 75cc Ø48mm ITALKIT Compétition Sport aluminium minarelli am6

Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles following gearbox fitted the engine MINARELLI AM3, AM4, AM5, AM6 euro 1 am6 euro 2:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, attention to motor past DERBI euro 3)
-APRILIA RX engine AM6 (after 2006, attention to motor past DERBI euro 3)
-APRILIA MX engine AM6 (after 2006, attention to motor past DERBI euro 3)

-Beta CRE

RR -Beta
-Beta RR ALU

-Honda HM
-Honda CRE
-Honda BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM DERAPAGE
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PEUGEOT XP6
-PEUGEOT XPS
-PEUGEOT XP STREET
-PEUGEOT XP STREET EVO
-PEUGEOT XR6
-PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
RS2 -RIEJU
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
SMX -RIEJU
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX EN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

SM -SHERCO
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
CK.44.748.G1
New product

Data sheet

Course
39.20mm (original)
Echappement
Ø 25 + 28mm (comme origine euro 1 er 2)
Nombre de transferts d'admission
6 transfers
Diameter (Ø):
48mm
Nombre de segment
Bi-segment (2 segments)
Recommended squish:
0.75mm
Cylindrée réelle
70.89cc
Displacement:
75cc
Lumière d'échappement
Oval
Compression ratio:
13.22:1
Matière
Aluminum
Cylinder head:
Simple tapered
Refroidissement
Liquid
You might also like
16 other products in the same category:

Reference: 133.1008

POLINI

Kit 80cc Ø50mm POLINI Evolution aluminum minarelli am6

One of the rare competitors at the height of the TEAM MHR, this POLINI EVOLUTION offers a lot of torque and power, to accompany a good configuration!

Price €289.99
Please note, requires a delay of more than 20 days!
More
Please note, requires a delay of more than 20 days!