• Banner

Kit 70cc Ø47mm high engine BARIKIT Racing cast DERBI euro 1 & 2
  • Kit 70cc Ø47mm high engine BARIKIT Racing cast DERBI euro 1 & 2

70cc high engine Ø47mm cast BARIKIT Racing DERBI euro 1 & 2

EQ-739

The version of 70cc RACING BARIKIT, with ups charts! More powerful, but does not neglect the couple, high motor guy with head Metrakit maintained by 2 screws and studs, solid cast iron cylinder, 5 transfers, oval exhaust with booster, dual piston segments ...!

Engine preparation
€150.83
Quantity
Shipping in 7 to 12 days depending on arrivals BARIKIT

Description

Not approved on the public highway, only reserved for the competition on closed circuit or road!

This high complete engine BARIKIT Racing cast iron is a very widespread pattern and rarely marketed. This model has 5 admission transfers including 4 side more rear, in addition, it has an exhaust boosters with an enlarged oval exit. This is the most special cast iron market. With its bore Ø47mm offers real 67,66cc normal race (like the original).

vue Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2


To maintain good strength, BARIKIT used high quality materials cast and posed a dual piston segment to slow high revs to maintain the torque and good strength, the internal architecture is correct and average finish, however, for such a price it still offers excellent benefits even though we are far from a kit MHR, POLINI ....

transferts Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2


The piston is thus a two-segment aluminum with a high silicon content, thanks to that it will be a major asset in the couple, the strength of the engine and slowing high speeds by increased friction, the two segments are fine ( 1mm), they are chromium steels and allow through their subtleties combine torque and pushed regimes engines.

cylindre Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2


The cylinder head is a model aluminum high compression hemispherical combustion chamber, polished finish. The latter is specific, in fact its fixing is done by two additional screws on each side in addition to the fastening by the nuts 4 studs.

piston culasse Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2


In the end, this kit is a model with very torquey diagrams, it is relatively powerful and very solid. Nothing prevents you to mount it with a crankshaft long race 43mm with a wedge base of 1.5 mm, which offer you a kit 75cc cast-powerful, strong and out of the common. The only negative, no cylinder head bolts is provided either manual or sticker.

échappement booster Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2

We recommend installing this kit with at least: carburation 19 or 21 mm with flexible mounting, complete intake kit, exhaust racing, reinforced crankshaft, reinforced bearings, cold candle racing Iridium racing motor oil 100% synthetic ....

T his pack contains:

-cylinder Ø47mm 70cc cast iron with 5 transfers and oval exhaust boosters
-Culasse High compression hemispherical room polished finish
-piston Bi-segments Ø47mm
X2 segments chrome Ø47 X 1mm for
Axis-piston Ø12mm X 39mm length
Crab-like piston -Clips
motor -Joints


zoom Kit 70cc haut moteur Ø47mm BARIKIT Racing fonte DERBI euro 1 & 2

Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!

This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:

BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto

Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2

GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc

And many other models ...

Product Details
EQ-739
New product

Data sheet

Course
Origin
Nombre de segment
Bi-segment (2 segments)
Cylindrée réelle
67.66cc
Nombre de transferts d'admission
5 transferts (comme l'origine)
Cylinder head:
Simple hémispherique
Matière
Melting
Displacement:
70cc
Refroidissement
Liquid
Lumière d'échappement
To boost (3 lights)
Diameter (Ø):
47mm

Specific References

ean13
8435031111326
You might also like
16 other products in the same category: