• Banner

Roll - piston without cylinder head 70cc Ø47,6mm AIRSAL T6 aluminium (axis of 10mm) minarelli horizontal air (ovetto, neos,…)
  • Roll - piston without cylinder head 70cc Ø47,6mm AIRSAL T6 aluminium (axis of 10mm) minarelli horizontal air (ovetto, neos,…)

Cylinder - piston without cylinder head 70cc Ø47,6mm AIRSAL T6 aluminum (10mm axis) minarelli horizontal air (ovetto, neos, ...)

021316476

Ideal for improving performance, all at a lower cost!

Engine preparation
€74.99
Quantity
Shipping in 20 to 90 days depending on factory arrivals.

Description

Attention, parts only reserved for competition, prohibited on the road!

Here is the best value for money 70cc aluminum kits on the market. This is the AIRSAL T6 Ø47.6mm. This cylinder head without a good price does not neglect the quality or performance .. It is high-quality aluminum and has 6 transfers of admission and an exhaust with bar. Also available complete with his head.

Cylindre - piston sans culasse 70cc Ø47,6mm AIRSAL T6 aluminium (axe de 10mm) minarelli horizontal air

The diagrams are high enough for the intake and low enough for the exhaust which makes it torquey and not difficult to accompany or adjust. The piston is a single-segment model with side grease nipples and preparation on the rear skirt! Clearly this kit has a very good torque / power ratio, it offers a lot of performance while preserving superb strength!

transferts Cylindre - piston sans culasse 70cc Ø47,6mm AIRSAL T6 aluminium (axe de 10mm) minarelli horizontal air

The piston is therefore the mono-segment model with hard chrome domed segment end thickness of 1mm. The finish is really on top. We recommend that you align the transfers to the lower engine casings to optimize performance.

échappement transferts Cylindre - piston sans culasse 70cc Ø47,6mm AIRSAL T6 aluminium (axe de 10mm) minarelli horizontal air

We recommend accompanying this kit with: 19mm carburetion (0.30mm or 0.35mm carbon valve blades), reinforced crankshaft and bearings, racing exhaust, racing spark plug, etc.

The pack therefore contains:

-X1 Aluminum cylinder 6 bar exhaust transfers
-X1 Piston mono segment with rear skirt preparation and side grease nipples
-X1 Hard chrome domed segment 1mm thick
-X1 Piston pin Ø10mm X 38mm
-X2 Piston clips in G
X1 High engine seal pack
-X2 Exhaust studs
-Notice ...

zoom Cylindre - piston sans culasse 70cc Ø47,6mm AIRSAL T6 aluminium (axe de 10mm) minarelli horizontal air

As an option we offer you a stage 1 preparation, this preparation is a modification of the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

 

Mounts on scooters and quads 50cc 2T air :

 

APRILIA SR 50 2T 1994->
APRILIA RALLY 50 2T (MINARELLI)
APRILIA SCARABEO 50 2T (MINARELLI)
APRILIA SONIC 50 2T
APRILIA SR WWW 50 2T
BETA ARK 50 2T
BENELLI 491 GT 50 2T (MINARELLI)
BENELLI K2 50 2T
BENELLI NAKED 50 2T
BENELLI PEPE LX 50 2T euro 2 (QJ1E40QMB-4)
BETA QUADRA 50 2T
BENELLI QuattronoveX 50 2T euro 2
BSV AX 50
BSV GZ 50
CPI ARAGON GP 50 2T
CPI HUSSAR 50 2T 2003->
CPI OLIVER 50 2T 2003->
CPI POPCORN 50 2T 2003->
EXPLORER CRACKER 50 2T 2003-> (GE 1E 400 MB)
GARELLI TIESSE 50R 50 2T euro 2 (1E40QMB)
HUPPER MONTECARLO 30 50 2T (1E40QMB)
KEEWAY F-ACT 50 2T
KEEWAY GOCCIA 50 2T (KW1E40QMB-4)
KEEWAY HURRICANE 50 2T euro 2 (KW1E40QMB)
KEEWAY MATRIX 50 2T (KW1E40QMB-4)
KEEWAY PIXEL 50 2T euro 2 (KW1E40QMB)
KEEWAY RY8 50 2T (KW1E40QMB-4)
MALAGUTI F10 50 2T
MALAGUTI F10 WAP 50 2T euro 2 (QJ * CMA03C *)
MALAGUTI F12-PHANTOM 50 2T
MALAGUTI F12 R ARIA 50 2T euro 2 (QJ * CMA02C *)
MALAGUTI YESTERDAY 50 2T
MBK EVOLIS 50 2T
MBK FIZZ 50 2T
MBK FLIPPER 50 2T
MBK FORTE 50 2T
MBK HOT CHAMP 50 2T
MBK MACH G 50 2T
MBK OVETTO 50 2T
MBK SORRISO 50 2T 1996->
MOTRON SYNCRO 50
MOTRON THUNDER'S 50
YAMAHA AXIS 50 2T
YAMAHA BREEZE 50 2T
YAMAHA JOG ER 50 2T
YAMAHA JOG 50 2T
YAMAHA JOG R 50 2T
YAMAHA JOG Z 50 2T
YAMAHA NEO'S 50 2T
YAMAHA VINO 50 2T
YAMAHA WHY 50 2T
YAMAHA ZEST 50 2T

 

Air cooled 50cc 2T Quads :


AEON 50cc REVO, MINIKOLT, COBRA ...
MASAI 50cc ULTIMATE, A 50 XL, R 50 XL, INFINITE, ...
DINLI 50cc LX DL601, DL603, DINO, T REX ...
ADLY 50cc RS, SUPER SONIC, ...
AERO 50cc ...
ETON 50cc VIPER, NXL 50, ...
KASEA 50cc SKYHAWK ...
POLARIS 50cc OUTLAW, PREDATOR, ...
SMC / BAROSSA 50cc UR5 ...

 

And other models ...

Product Details
021316476
New product

Data sheet

Nombre de transferts d'admission
6 transfers
Displacement:
70cc
Matière
Aluminum
Refroidissement
Air
Lumière d'échappement
With bar (2 parts)
Diameter (Ø):
47.6mm
Nombre de segment
Mono-segment (1 segment)
Transferts a l'embase
Large transfers (work of the original casings necessary)
You might also like
16 other products in the same category: