Reference: 85120.02A
Piston mono segment PARMAKIT by Ø45mm VERTEX axis 12mm for kit 70cc on ZUNDAPP KS SUPER 50 LC
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Banner
Delivered with its mono-segment vertex piston, seals, aluminum cylinder 4 transfers ... Two lateral and two rear filling. Liquid cooling.
Here is the only high engine still available on the market for the ZUNDAPP liquid cooling SUPER 50 LC, KS 50 LC ...! A real collector's item delivered without cylinder head! Assembly with original cylinder head.
This kit is very powerful and should be accompanied by at least a 21 to 25mm carburetor and a well released exhaust, intake pipe required: 2 screws between 44mm axis. A very beautiful piece, rare on the market!
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85120.02A
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Reference: 31303.16
Segment high quality, ideal for the maintenance of your 70cc PARMAKIT on KS 50 LC, 50 LC SUPER ... From zundapp.
Reference: 85120.03
Complete seal pack for 70cc liquid cooling kit on KS 50 LC, SUPER 50 LC ...
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 073800
The most powerful kit on the market for SACHS has cylinder head connected to the cylinder! Full version with clamshells!
Reference: 020306435
Very good little aluminum kit for MORINI M1 engine, M101, M1ES, M1K ... 50 2T!
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 30122.00
Kit very torquey, robust and powerful for GUZZI DINGO 50cc 2T.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64168.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a long-stroke crankshaft.
Reference: 85307.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.