Reference: 85120.02A
Piston mono segment PARMAKIT by Ø45mm VERTEX axis 12mm for kit 70cc on ZUNDAPP KS SUPER 50 LC
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Banner
Delivered with its mono-segment vertex piston, seals, aluminum cylinder 4 transfers ... Two lateral and two rear filling. Liquid cooling.
Here is the only high engine still available on the market for the ZUNDAPP liquid cooling SUPER 50 LC, KS 50 LC ...! A real collector's item delivered without cylinder head! Assembly with original cylinder head.
This kit is very powerful and should be accompanied by at least a 21 to 25mm carburetor and a well released exhaust, intake pipe required: 2 screws between 44mm axis. A very beautiful piece, rare on the market!
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 85120.02A
Spare piston kit for 70 ° on ZUNDAPP cc liquid cooled!
Reference: 31303.16
Segment high quality, ideal for the maintenance of your 70cc PARMAKIT on KS 50 LC, 50 LC SUPER ... From zundapp.
Reference: 85120.03
Complete seal pack for 70cc liquid cooling kit on KS 50 LC, SUPER 50 LC ...
Reference: 148.6008
The POLINI 6000 series kit reproduced for enthusiasts! For 39.6mm stroke.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 53498.00
The very last parmakit for 42mm stroke on MINARELLI P6 engine.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 012002435
A complete set of quality. Guaranteed performance!