Reference: 54272.02
Single segment piston PARMAKIT Ø42mm kit PARMAKIT on engine MORINI FBM TURBO, TESTI GRAND PRIX, BETA CAMISCIO 4M..
Ø42mm spare piston for PARMAKIT kit on vintage FBM motorcycle.
Banner
High quality aluminum cylinder - piston Ø42mm kit for old engines from the 1950s / 1960s FBM, FBM was the association of future MINARELLI and FRANCO MORINI to make engines!
These engines were fitted to the machines before the famous MINARELLI P4 / P6. On machines like the TESTI GRAND PRIX, MORINI FBM TURBO, MINARELLI P4 CARTER TONDI, BETA CAMOSCIO 4M ... This kit is delivered complete with piston, seals, segments, axle, clips, instructions ... This kit offers a good gain performance in addition to a refurbishment.
Cylinder stud center distance: 40mm x 40mm
Intake stud center distance: 42mm
Exhaust muffler mounting thread: 38mm x 1.5mm
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 54272.02
Ø42mm spare piston for PARMAKIT kit on vintage FBM motorcycle.
Reference: 54272.03
Gasket for PARMAKIT kit on vintage FMB 50cc 2T motorcycle.
Reference: 54272.16
Premium segment to refurbish and increase your engine compression!
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: CI.49.650.G
Very high performance kit for MORINI M1 / M 101 engine!
Reference: 26105.00
Very torquey, robust and powerful kit for FLANDRIA 50cc 2T.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 148.6002
The POLINI 6000 series kit reproduced for enthusiasts! For 44mm stroke. Have
Reference: 25104.00
PARMAKIT 80cc special kit for old FANTIC CABALLERO. 48X48mm studs.
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 85120.00
The only kit available on the market for ZUNDAPP liquid cooling SUPER 50 LC, KS50LC ...!
Reference: 64450.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 14mm with 4 transfers with a short stroke crankshaft.
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.