Reference: 020305
Pipe Ø15mm X 19mm ATHENA Racing for minarelli P6, P4, BETA TR 35, MACAL P4R ...
Ideal for fitting a carburettor SHA 14 to 16mm over your old moped box MINARELLI P4, P6, BETA, MACAL ...
Banner
Kit 80cc ATHENA high quality. Ø big bore of 48mm, it consists of a cylinder made of aluminum treated nicasil high end of EUROCILINDRO. ASSO piston with high silicon content, flat cap with mono-segment in L.
This excellent set is given with a wedge of admission, a valve box adhered to the viton with two joined double strips in karbonit fiber, you can mount them with or without stops lamelles.
Two intake hoses are given to you with one for 15 and 16mm SHA carburetors, and one for 19 or 21mm PHBGs.
This high performance complete set is obviously very torquey and robust, ideal for refurbishing your old MORINI 2T 50.
Mounts on old MORINI engines :
Franco Morini 2T T4 - Motorcycles-mopeds
Franco Morini GS 50 - Motorcycles-mopeds
Ghiaroni BROOKLIN XL 50 - Motorcycles-mopeds
Morini RV 50 - Motorcycles-mopeds
Omc MUDOY 50 - Motorcycles-mopeds
Peripoli HIC 50 - Motorcycles-mopeds
Peripoli HR 50 - Motorcycles-mopeds
Peripoli OXFORD 50 - Motorcycles-mopeds
Sacom RAINBOW 50 - Motorcycles-mopeds
Sis Morini SIS MORINI 50 - Motorcycles-mopeds
Testi SSCOT 50 - Motorcycles-mopeds
Tunturi TIGER 50 - Motorcycles-mopeds
Zanella RACING MOPED 50 - Motorcycles-mopeds
Reference: 020305
Ideal for fitting a carburettor SHA 14 to 16mm over your old moped box MINARELLI P4, P6, BETA, MACAL ...
Reference: S410000304002
The ATHENA clips of good quality for 12mm axles with 1mm diameter piston groove!
Reference: 020502.A
The replacement piston kits ATHENA for Ø48mm on minarelli P4.
Reference: 001716/R
High-end segment to refurbish and increase your engine compression.
Reference: 020005
Ideal for the installation of a 19 to 21mm PHBG carburetor on your old moped with MINARELLI P4, P6, BETA, MACAL ... 50mm center distance.
Reference: 003803
Pack of complete seal for kit 80cc ATHENA air on MORINI T4, GS, TUNTURI, ZENELLA, PERIPOLI ...
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 85215.00
The high engine complete with cylinder head, 70cc, for ZUNDAPP air cooling, big model flaps!
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 007100
ZUNDAPP is very robust and powerful!
Reference: 64262.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 4 transfers crankshaft long race.
Reference: 85465.00
kit Ø45mm 70cc for ZUNDAP 50 air cooling, admission without valves on cylinder.
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.