Banner
Excellent small 50cc kit, ideal for maintaining good engine reliability and durability! Mounts with the cylinder head origin or high compression model.
Cylinder respecting 50cc engine, licensed on the open road.
Ideal for refurbishment safe and solid. Here is the very good kit 50cc Ø40 mm at DR. The cylinder / piston without cylinder head is installed on motor scooter KEEWAY, CPI .... It is good quality and finish is clean, his race is original 39.2 mm, its real capacity is 49,24cc. Compared to a high engine of origin is relatively more efficient, provided a perfect fit and rules. 
The cylinder model is the famous cast "minacrom" (added to the chrome) for strength black with high temperature paint to the aesthetic side. With 5 admission and transfer of an oval échappemen / normal. His diagrams are tailored for optimum strength, combining torque and improved times. 
Accompanied by a two segment piston high silicon content (stronger), with 2 segments thickness 1.2 mm. The domed piston head for more compression and has a preparation for the rear skirt for a better scanning and thus improve filling the adimision! We regret that it is delivered without cylinder head but can be mounted with the head origin or high compression for improved performance. 
Delivered as presented with cylinder pack seals, piston two segments, two segments, clips, pin, instructions and a game 5gr rollers (not present on the photos) to refine the setting you change in order to maximize the cylinder .... You will understand, this little kit is a great model originally replacement that will make you slightly improve performance with an excellent quality / price!
We recommend when installing the cylinder, to accompany with at least: breech or origin for the best high compression cylinder head, engine oil 100% synthetic, a carburizing 17.5mm to 19mm, exhaust racing, B9ES candle ... 
contains:
Cast iron cylinder minacrom Ø40 mm 5 transfers with normal exhaust.
Bi piston segment.
X2 chrome 1.2mm thick segments.
Piston pin Ø 12 x 33 mm reinforced.
Ø12mm piston X2 clips C.
Pack seal.
Instructions.
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
BENELLI Pepe
BENELLI Quattronovex
CPI Aragon
CPI Hussar
CPI Oliver
CPI Popcorn
EXPLORER Cracker
GARELLI Tiesse
Hüpper Montecarlo
KEEWAY F-act
KEEWAY Matrix
KEEWAY Goccia
KEEWAY Hurricane
KEEWAY Pixel
KEEWAY RY8
And many other models ... 
Reference: SG15684
Set of 2 spare segments for your kits 50cc DR iron diameter 40mm on scooter PIAGGIO GILERA &! Ideal for refurbishment or maintenance in the rules.
Reference: PT00107
The spare piston for DR cast iron bi-segment 50cc cylinders.Available in 2 bore sizes.
Reference: GR00733
Ideal for refurbishment perfect and without leakage. Make sure you change your joints at each refitting.
Reference: 01300140
A more efficient kit that originally while keeping a very good fastness.
Reference: 462482
A very solid original type kit ideal for starting off on an excellent engine base.
Reference: 9925650
A kit a little more efficient than the original and especially more torque, cast iron cylinder, twin segment piston, high compression cylinder head ....
Reference: 462482
A very strong original type kit ideal to start on an excellent motor base.
Reference: CIL-755
A high engine a little bit better than originally KYMCO ATVs and scooters with 50cc cylinder on admission.
Reference: 02320141
A kit slightly more powerful than the origin especially intended to roll every day.
Reference: 071300/1
Ideal to ride every day respecting the engine capacity 50cc.
Reference: 02160139
A kit that performs better than the original while keeping very good strength.
Reference: 3113865
A kit much more powerful than the origin which will allow you a good gain of performance and an increased solidity.
Reference: 030320
One of the cheapest on the market, ideal to repair a high engine whose breech is not damaged!
Reference: 073400
Ideal to start on a good motor base. Powerful, solid and reliable, a cylinder to accompany your original breech.
Reference: 02160539
A kit slightly more powerful than the origin especially intended to roll every day.
Reference: 478899
A cylinder without cylinder head of good quality and much cheaper than the origin in concession, ideal to refurbish your engine to roll every day.
Reference: 071300
High quality cylinder to refurbish your 50cc scooter engine!
Reference: 01300340
The must AIRSAL kits. Most worked while maintaining maximum strength.
Reference: 814
A little more powerful than originally nice.
Excellent small 50cc kit, ideal for maintaining good engine reliability and durability! Mounts with the cylinder head origin or high compression model.
