• Banner

Kit 50cc engine high Ø40,3mm BARIKIT Racing aluminum minarelli AM6
  • Kit 50cc engine high Ø40,3mm BARIKIT Racing aluminum minarelli AM6

Kit 50cc high engine Ø40,3mm BARIKIT Racing aluminum minarelli am6

EQ-922-S

High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...

Stage 1 engine preparation
€166.66
Quantity
Shipping in 7 to 12 days depending on arrivals BARIKIT

Description

Homologated on the public highway, respects the regulatory displacement of 50cc.

Here is an excellent 50cc high-performance aluminum kit for mécaboite Minarelli AM6, it is the BARIKIT Racing model with a mono segment piston with a bore diameter Ø40.30 mm. This aluminum model therefore offers a 50cc engine capacity to be in order and circulate every day, solid thanks to the aluminum alloys used. With its high compression cylinder head with incoming stud to optimize alignment with the cylinder and increase engine compression.

zoom Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


Its aluminum cylinder therefore has 5 intake transfers including 1 at the rear and 4 lateral. Its admission is reworked, we also recommend mounting a 19mm PHBG carburetor on the cylinder or even 21mm if you rework the intake slightly, the exhaust outlet is also significantly improved thanks to a bar outlet. Diameter of the exhaust outlet Ø28 mm, shim for passage to a diameter Ø25 mm not supplied.

échappement Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


An architecture very well studied for this small aluminum offering performance, high revs improved compared to the original model, especially coupled with the good compression ratio offered by the frustoconical combustion chamber, polished finish of the cylinder head. A kit of screws and fittings is also provided, as presented in addition to the joint pack with two base gaskets of different thickness to refine your squish.

transferts Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


This kit does not neglect the couple but privileges the high engine outputs, its solidity is not altered with its resistant mono-segment piston which goes perfectly with this cylinder that goes without saying, a fine chrome-plated resistant segment favoring the rise in speed, thickness of the latter 1 mm.

admission Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


For a very correct price, you will have a high engine respecting the 50cc displacement and offering well-felt performance! An excellent basis of preparation also for the most connoisseurs wishing to have fun every day or circulate on the circuit. The cooling system is also improved thanks to the cylinder head well studied at the same time and the aluminum alloys used.

culasse Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


We advise you to accompany this high engine with at least: 19 mm carburetor, flexible pipe admission, crankshaft and reinforced bearings for the best and set off again on a completely new engine without problems, new racing spark plug, 100% engine oil synthesis, detent escapement ....

vue Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6


The pack contains :

- Aluminum cylinder Ø40.30 mm 5 exhaust transfers with bar
-High compression frustoconical chamber head polished finish with incoming stud
- Piston 40.30 mm single segment
-1 Chromed end segment thickness 1 mm
- Piston pin Ø12 X 33 mm
- Crab type piston clips
-Pack complete seal
- Cylinder head bolts
- Sticker

montage Kit 50cc haut moteur Ø40,3mm BARIKIT Racing aluminium minarelli am6

Optionally we offer a stage 1 preparation, this preparation is a modification of the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!

This high engine is mounted on 50cc motorcycles with the following gearbox equipped with the MINARELLI AM3, AM4, AM5, AM6 euro 1, AM6 euro 2 engine:

-APRILIA RS AM6 engine from 1997 to 2006 (after 2006, beware of DERBI euro 3 engines)
-APRILIA RX AM6 engine (after 2006, watch out for DERBI euro 3 engines)
-APRILIA MX AM6 engine (after 2006, watch out for DERBI euro 3 engines)

-BETA CRE

-BETA RR
-BETA RR ALU

-HONDA HM
-HONDA CRE
-HONDA BAJA

-HUSQUVARNA WXE
-HUSQUVARNA CH

-HM SKIDDING
-HM CRE
-MALAGUTI DRAKON

-MALAGUTI XTM
-MALAGUTI XSM

-FANTIC CABALLERO

-PE PEUGEOT XP6
-PE PEUGEOT XPS
-PE PEUGEOT XP STREET
-PE PEUGEOT XP STREET EVO
-PE PEUGEOT XR6
-PE PEUGEOT XR7

-MOTORHISPANIA RYZ
-MOTORHISPANIA RX-R
-MOTORHISPANIA RX

-RIEJU RS1
-RIEJU RS2
-RIEJU RS2 MATRIX
-RIEJU RS2 MATRIX PRO
-RIEJU SMX
-RIEJU MRX
-RIEJU SPIKE

-KEEWAY TX IN

-YAMAHA DT
-MBK X-LIMIT
-YAMAHA TZR
-MBK X-POWER

-SHERCO SM
-SHERCO ENDURO
-SHERCO HRD
-SHERCO ENDURO

And many other machines!

Product Details
EQ-922-S
New product

Data sheet

Matière
Aluminium
Course
Origin
Refroidissement
Liquid
Echappement
Ø 28mm (as original euro 1)
Nombre de transferts d'admission
5 transferts (comme l'origine)
Cylinder head:
Simple tapered
Nombre de segment
Mono-segment (1 segment)
Displacement:
50cc
Transferts a l'embase
Like the origin (aligned to the original casings)
Lumière d'échappement
With bar (2 parts)
Diameter (Ø):
40.30mm

Specific References

ean13
8435031101044
You might also like
16 other products in the same category: