Reference: 229.0596/GT
§ FURYTECH RS10 GT Ø40.3mm piston for 50cc kit on derbi euro 3 & 4
Ideal in case of loss of compression or simply for refurbishment.
Banner
Already available from us, here is the latest kit from FURYTECH named RS10 GT. This 50cc kit is reserved for demanding users who want a high performance engine, remaining in the legal capacity of 50cc and preserving strength and torque!
The least we can say is that FURYTECH has worked hard, they installed a new, more solid piston fitted with 0.8mm thick domed segments to reduce friction as much as possible, two in number (bi- segment) in order to preserve torque and solidity.
The cylinder is made of aluminum with a very high-end nikasil treatment, the finish is excellent, for more performance, they opted for a booster exhaust (in 3 parts), the exhaust duct is obviously correctly round and unbridled, 5 intake transfers are present in order to offer better sweeping and better feed the racing animal. You will not need to align the crankcases with the cylinder. Same level head evolution is very present, it is stud with polished hemispherical room giving it a good cooling. T stud is to maintain aligned entering the room to the cylinder. The cylinder head cover is also great studied and has an excellent keeps! the cylinder also comes with 3 joints of base plate to make the squish.
To summarize, this cylinder also has in-between diagrams, which allows you power while preserving the torque, with its twin segment ends identically it allows on the one hand high speeds with less friction but preserves torque, this cylinder is really a nice compromise which proves once again that FURYTECH = SERIEUSE & EVOLUTION BRAND.
We recommend with this RS10 GT thermal group: racing exhaust, carburetion Ø19 to 21mm with racing valves, cold racing spark plug, reinforced crankshaft, transfer aligned to the crankcase if desired.
The pack consists of :
Bi-segment piston
2 thin segments 0.8mm
12mm axle
2 crab type piston clips
Aluminum cylinder 6 transfers of admission exhaust has boosters
3 base gaskets
O-ring cylinder head gasket
Exhaust gasket
Screws
Cylinder head cover
Cylinder head stud
notice
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Reference: 229.0596/GT
Ideal in case of loss of compression or simply for refurbishment.
Reference: 329.0596/GT
A very complete seal kit of very good quality at a low price, ideal for reassembly without leaks.
Reference: 429.0596/GT
Here is the spare segment set for your high FURYTECH RS10 GT bi-segment engines on DERBI euro 3 and 4 engine!
Reference: 477192
A kit much cheaper than the original of good quality which will bring you good strength.
Reference: 010841399
A kit more powerful than the origin with a very good solidity.
Reference: 030312
One of the cheapest kits on the market. Ideal for repairing your euro 3 at a lower cost.
Reference: EQ-748
Solid and efficient, a complete high engine ideal to respect the 50cc displacement and to circulate every day 5 transfers, oval exhaust with booster rocket, high compression cylinder head, two piston segments ....
Reference: H010892399
A kit a little more powerful than the original while maintaining excellent reliability for a totally ridiculous price.
Reference: 466945
A very good quality kit that will offer excellent strength and all this at a low price!
Reference: H020892399
Ideal to have a kit of very good quality with better performance than the original without paying dearly at the time.
Reference: 23168.00
One of the most powerful kits on the market in 50cc therefore approved on the road!
Reference: 504642
The latest cry from DOPPLER , the high cast iron engine which brings a good performance gain on DERBI euro 3 and 4 while preserving the solidity and the legal displacement of 50cc.
Reference: 11000188
A super powerful kit, clearly above all the other 50cc!!
Reference: 479510
A kit more powerful than the origin with a very good solidity.
Reference: CIL-748
Solid and efficient, a cylinder / piston without cylinder head ideal to respect the 50cc displacement and to circulate every day 5 transfers, oval exhaust with ooster, dual piston segments ....
Reference: 480588
A very good 50cc kit which will bring you great performance as well as excellent reliability. Surely one of the best value for money on the market.
Reference: 031000L
A very good little cast iron kit with exhaust boosters for DERBI euro 3 and euro 4, legal displacement respected, increased performance and lower price!
Reference: 020841399
A kit more powerful than the origin with a very good solidity, cheap because sold without cylinder head.
Reference: 032061
A high-performance kit, solid, clean and delivered with a stud bolt!