Reference: H040890399
Aluminum cylinder head AIRSAL AIRSAL for kit 50cc cast iron DERBI euro 1 & 2
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Banner
Introducing the all new 50cc cylinder in AIRSAL. For the first time AIRSAL launches in iron kits. You should know that a cast kit is stronger on the long journey, so it provides additional reliability but it gives a little less power than aluminum kit.
This model has Ø39,9mm diameter do not hide, good performance in comparison to the original. It will certainly be more efficient because it has a very correct finish, work in the channels but is revised and corrected above all, a good item to start with a good foundation.
It is of course equipped with a twin-piston segment for better torque and scanning. Warning sold without cylinder head. In clear this is a very good roll, better than the original that will give you reliability and torque without spending too much.
The pack contains:
Pack complete joint
Cast iron cylinder 5 transfers
Bi-piston segment
2 segment
2 piston clips
Ø12mm piston pin
Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
This high engine fits the 50cc motorcycles équpées gearboxes from Euro1 and Euro2 DERBI:
BULTACO Astro Enduro 50cc
BULTACO Lobito 50cc supermoto
Derbi GPR 50 Nude before 2004 (EBS050)
Derbi GPR 50 Racing before 2004 (EBS050)
Derbi GPR 50R Replica year 2001-2004
Derbi GPR 50cc year 1998-2001
Derbi Senda 50cc before 2000 (tubular frame)
Derbi Senda 2000 50cc before 2004 (perimeter frame) Euro2
Derbi Senda DRD supermotard before 2000 (tubular frame)
Derbi Senda DRD supermotard before 2004 (perimeter frame) Euro 2
Derbi Senda Enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2000 (tubular frame)
Derbi Senda DRD R enduro before 2004 (perimeter frame) Euro2
Derbi Senda SM before 2000 (tubular frame)
Derbi Senda SM before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race 2000 before 2004 (perimeter frame) Euro 2
Derbi Senda X-Race Trail before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2000 (tubular frame)
Derbi Senda X-Trem Enduro before 2004 (perimeter frame) Euro 2
Derbi Senda SM X-Trem before 2000 (tubular frame)
Derbi Senda SM X-Trem before 2004 (perimeter frame) Euro 2
GILERA GP Replica 50cc
GILERA GSM 50cc
GILERA 50cc HAK Euduro
GILERA RCR Euduro 50cc (tubular frame)
GILERA SMT SM 50cc (tubular frame)
GILERA Sioux Enduro 50cc
GILERA Zulu Enduro 50cc
And many other models ...
Reference: H040890399
A yoke of very good quality which would ideal in case of breakage or wear on your head on your 50cc cast AIRSAL Origin kit.
Reference: H140890399
A comprehensive quality seal pack, ideal for wind your engine without leakage.
Reference: H060890399
A good quality piston to change every 7000 kms.
Reference: H110890399
Ideal for lost compression in order to present its high engine renovated.
Reference: 129.0595
Out of production!
Reference: G-993-R
39.9mm version 50cc cylinder head stud prepared by professionals BARIKIT. Even more powerful than other 50cc BARIKIT!
Reference: CK.12.500.G
The bi-segment version with 50cc cylinder head stud for your DERBI engine, very torquey and strong, he does not neglect high revs! High quality certified!
Reference: P400105100001
Unbeatable value for money, really nice power ... Even no need for prepa, aligned to the original casings! Speak very well on small configuration.
Reference: 9917400
A famous kit for its reliability and sturdiness, ideal for riding every day while having a good top speed, acceleration and recovery.
Reference: 3112371
The best 50cc kits on the market for DERBI euro 1 and 2! It is the strongest, most powerful that I have used in competition.
Reference: EQ-740
Solid and efficient, a high sport model engine ideal for respecting the 50cc displacement and circulating every day 5 transfers, oval exhaust to boost, high compression cylinder head mounted on O-ring, piston bi segments ...
Reference: 11000178
The most powerful kit from BIDALOT, mono-segment, very high quality aluminum!
Reference: 491303
The latest cry from DOPPLER , the high cast iron engine which brings a very good performance gain on DERBI euro 1 & 2 while preserving the solidity and the legal displacement of 50cc.
Reference: 129.0595/GT
The latest addition FURYTECH! More powerful, more torque ...
Reference: 11000052
A 50cc high-end home kit BIDALOT for DERBI euro 1 & 2.
Reference: 010814399
A small cheap kit that will bring light performance to your machine while keeping a very good reliability on your machine.
Reference: CIL-740
Strong and powerful, cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate all day. 5 transfers, oval exhaust has booster, dual piston segments .... Model sport accompanied by a yoke around with O-ring.
Reference: 56112
A motor type origin of good quality with a finish more than correct and a small price guarantees in the range of high engines 50cc for mécaboite DERBI euro 1 & 2.
Reference: 23154.00
A high-end package respecting the 50cc displacement thus approved.
Reference: HM02 MVT
A powerful kit with high quality materials. He will bring strength and torque!