§ 50cc kit with liquid aluminum cylinder head BIDALOT Type Europe / G3 Speed ​​MBK 51 / MOTOBECANE av10

Out of production here for informational purposes only. We recommend replacing the "liquid aluminum 50cc kit with cylinder head BIDALOT G2 Type Cross MBK 51 / MOTOBECANE av10" which has slightly smaller diagrams.

Here are the top engine kit 50cc Type Europe / G3 speed at BIDALOT for MBK moped 51, motobecane av10, this latest version of the brand is the reissue of 1992 / 1993. Finishing and machining excellent with single exhaust pipe, a cylinder bore Ø40mm with 5 2 side transfers including revised upwards and sharper diagrams based on high revs and speed.



This quality aluminum cylinder comes with its specific cylinder head with optimized cooling system and high compression combustion chamber, polished finish. A cage has needle also provides Ø12mm X 16mm X 16mm, this cylinder is specially machined to be installed with a crankshaft competition BIDALOT short race 39,70mm.



The exhaust outlet is machined to use the ball Ø38mm to pose a competition exhaust, though thanks to adapter set Accessory link, you can ask any conventional exhaust. In addition, a set of 3 joints of base plate with different thicknesses is also provided to make your squish to perfection.



Clearly, this high engine is truly exceptional piece in very limited series, excellent finishes with very good machining, delivered 100% complete as presented.



We recommend this high engine with: crankshaft competition BIDALOT OPEN short race 39,7mm (requires little machining the cylinder head), original casings BIDALOT prepared or casing, reinforced bearings, cold candle racing along pellet Ø19mm carburation, ignition variable advance to racing, racing valves with thickness appropriately lamella, 100% synthetic racing oil only, racing variation (supplement for low speeds) perfectly tuned ....



contains:

-cylinder Europe Type / Speed ​​G3 aluminum 5 transfers 50cc Ø40mm
-Culasse High compression optimized aluminum
-piston Cast racing BIDALOT
-Segment Cast chrome end 40mm x 1mm thick
X2 crab piston clips reinforced 1mm thick
Axis-piston Ø12mm X 33mm
-Cage Reinforced needle Ø12 X 16 X 16mm
-Rondelle + Copper cylinder head bolts
-Joints Yoke rings
-3 Base seals thicknesses 0,15 / 0,25 and 0,40mm
-Sticker
-Notice