Reference: H06138540
Piston AIRSAL bi-segment 40mm to 10mm axle AIRSAL kit 50cc cast iron on minarelli vertical (booster rocket, bws ...)
Bi-segments spare piston to the cylinder AIRSAL 40mm 50cc cast iron oval exhaust.
Banner
Introducing the all new 50cc cylinder in AIRSAL. For the first time AIRSAL launches in iron kits. You should know that a cast kit is stronger on the long journey, so it provides additional reliability but it gives a little less power than aluminum kit.
This model has Ø39,9mm diameter do not hide, good performance in comparison to the original. It will certainly be more efficient because it has a very correct finish, work in the channels but is revised and corrected above all, a good item to start with a good foundation.
It is of course equipped with a twin-piston segment for better torque and scanning thanks to its 2 side nipples and openings on the rear apron with two chrome segments 1mm for the couple but neglected favoring thicknesses high revs for maximum strength, clips G axis of Ø10mm piston length of 33mm.
Warning sold without head but mounts with original cylinder head. Clearly this is a very good roll, better than the original that will give you reliability and torque without spending too much.
The pack contains:
-pack Complete joint
Master cylinder cast iron 5 transfers
-piston Bi-segment
-2 Segment 1mm thick chrome purposes
-2 Clips piston G
Axis-piston Ø10mm X 33mm
-Notice ...
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
APRILIA AMICO
Aprilia SR (before 1993 only)
FANTIC BIG WHEEL
GARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW's NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And many other models ...
Reference: H06138540
Bi-segments spare piston to the cylinder AIRSAL 40mm 50cc cast iron oval exhaust.
Reference: H11138540
The replacement segment to cast your kits 50cc two-segment with normal exhaust AIRSAL on minarelli vertical, booster ...
Reference: H14138540 - 14133440 - 14131740 - 14131140
For refurbishing of quality and a waterproof motor!
Reference: 376592
Ideal to ride every day with more performance while maintaining its engine capacity and original cylinder head!
Reference: 482032
The cheapest type kit from the market with a quality and a correct finish.
Reference: 477533
Ideal to circulate every day with a powerful and solid 50cc kit.
Reference: 031000
A small kit at a low price, nice, solid and a little more efficient than the original.
Reference: 070000/1
A high engine full of high quality. Ideal to improve your performance while preserving the 50cc engine capacity.
Reference: 5WWWE13A1000
A cylinder - piston 50cc without cylinder head, genuine origin very high quality.
Reference: 129.0602
An original type kit original look with a black and orange cylinder head. As reliable as the origin for a good price. Last piece available before retirement production !!!
Reference: 76505.00
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: 129.0611
A great kit 50cc aluminum, just below the RS10 GT, ideal for riding every day because it has a great ratio torque / power / strength.
Reference: 31 8565
For more performance and a strong engine! This 50cc kit will be very good to equip your scooter with Minarelli / Yamaha Vertical Air low engine.
Reference: 166.0092
A very good high engine that brings a very good performance by preserving the strength and legal displacement of 50cc.
Reference: 76504.00
Already available with us, the very latest from PARMAKIT! More powerful, more torquey, ...
Reference: 02131740
The aluminum 5 transfers kit without cylinder head, piston and exhaust has two segment boosters.
Reference: 129.0614/GT
Already available with us, the very latest from FURYTECH! More powerful, more torquey ...
Reference: 02131140
The kit aluminum 5 transfers without cylinder head, piston Bi segment and rectangular exhaust standard.
Reference: 01131740
The high complete engine with exhaust LUXURY RACING has boosters, bi segment ...