Reference: 229.0602
FURYTECH piston segment Ø40mm bi-axis 10mm for kit 50cc cast PRO RS10 on minarelli vertical (booster rocket, bws ...)
A good quality piston and finish changing all the 5 000 to 6 000km maximum for peak performance.
Banner
Last piece available before retirement production !!!
Here is a small kit 50cc original type of home FURYTECH Racing Parts, this model 40mm diameter cast iron will not offer you more performance than a cylinder origin however bring you strength, reliability and this for a low price!
Ideal to start a new with your minarelli vertical, booster rocket, bws ... It comes with an orange head quality, high-compression chamber.
The pack contains:
X2 clips of piston
X1 segment
X1 Ø40mm piston
X1 piston pin
X1 rolls cast iron 5 transfers exhaust normal Ø40mm
X1 cylinder head high compression orange
X1 game engine joints high
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
APRILIA AMICO
Aprilia SR (before 1993 only)
FANTIC BIG WHEEL
GARELLI PONY
GARELLI SR
ITALJET BAZOOKA
ITALJET PISTA
ITALJET REPORTER
ITALJET SCOOP
ITALJET YANKEE
ITALJET ASCOT
ITALJET ASTRA
LEM FLASH
LEM GHIBLI
LEM TORNADO
LEM TORNADO SS1
KOTIR SR
KTM CHRONO
MBK BOOSTER
MBK BOOSTER NAKED
MBK BOOSTER ROCKET
MBK BOOSTER NEXT GENERATION (NG)
MBK BOOSTER CW
MBK BOOSTER SPIRIT
MBK STUNT
MBK TARGET
MBK BOOSTER TRACK
YAMAHA BW'S
YAMAHA BW's NG
YAMAHA BW'S ORIGINAL
YAMAHA BW'S NAKED
YAMAHA CRZ
YAMAHA CT
YAMAHA SLIDER
YAMAHA SPY
YAMAHA ZUMA
And many other models ...
Reference: 229.0602
A good quality piston and finish changing all the 5 000 to 6 000km maximum for peak performance.
Reference: 329.0602
A pack seal of good quality. Make sure you change your joints at each winding to a safe and reliable installation.
Reference: 429.0602
Ideal to give your life a high compression engine in case of loss, primer or tightening.
Reference: HM06
A powerful kit with high quality materials. It will bring you strength and torque!
Reference: 166.0092
A very good high engine that brings a very good performance by preserving the strength and legal displacement of 50cc.
Reference: 376592
Ideal to ride every day with more performance while maintaining its engine capacity and original cylinder head!
Reference: 129.0602/C
An original type kit original look in full carbon. As reliable as the origin for a good price.
Reference: 31 6901
An excellent high engine which brings a very good performance gain, increased strength and the legal displacement of 50cc.
Reference: 032000
A slightly improved kit compare to the origin with an unbeatable price.
Reference: 441319
A small aluminum kit type original improved to restore your vertical minarelli engine.
Reference: 440569
A cheap cast iron cylinder ideal for driving every day.
Reference: 129.0611
A great kit 50cc aluminum, just below the RS10 GT, ideal for riding every day because it has a great ratio torque / power / strength.
Reference: 01131140
The high complete engine with cylinder head AIRSAL SPORT, rectangular exhaust, bi segment ...
Reference: 482032
The cheapest type kit from the market with a quality and a correct finish.
Reference: 01133440
The high complete engine with exhaust RACING has boosters, mono-segment ...
Reference: 214655
A very good little cylinder that will earn you a lot of performance sold without cylinder head to save money. But mounts very well on the breech of origin.
Reference: 479126
A kit type origin very well finished of excellent quality. As reliable as the origin for an interesting price.
Reference: 31 6906
A kit but without cylinder head that mounts with original cylinder head for a low price while keeping very good performance.
Reference: 76505.00
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.