• Banner

Kit 50cc Ø40,2mm FURYTECH RS10 PRO NIKASIL aluminum (10mm axis) minarelli horizontal liquid (nitro, aerox, ...)
  • Kit 50cc Ø40,2mm FURYTECH RS10 PRO NIKASIL aluminum (10mm axis) minarelli horizontal liquid (nitro, aerox, ...)

Kit 50cc Ø40,2mm FURYTECH RS10 PRO NIKASIL aluminum (axis of 10mm) minarelli horizontal liquid (nitro, aerox ...)

129.0612

Just below the GT RS10, RS10 the NIKASIL PRO is a high performance aluminum kit with torque / power ratio excellent.

Engine preparation
€137.49
Quantity
Caution requires a delay of more than 20 days

Description

Here is the very good kit 50cc aluminum in FURYTECH, like his brother the cast, it is called the RS10 PRO. This model has placed below the GT side however its performance standard type of escapement, his diagrams a little bit lower and rear inlet system has big transfer make a torquey and very solid cylinder.

zoom transferts échappement kit rs10 pro nikasil nitro aerox minarelli liquide scooter

The piston is a two-segment for 1mm thickness model to fully liberate the race and reduce friction, the cylinder is made ​​of aluminum with treatment upscale nikasil. 5 admission transfers and one light rectangular type of exhaust.

cylindre 50cc rs10 pro nikasil nitro aerox minarelli horizontal liquide scooter

The diagrams are really in-between to provide the ratio torque / power perfect, not necessary with this type of cylinder to adjust the way it howls engine for power. All parameters that make a simple cylinder, strong, torquey and efficient enough a high speed. The cylinder head is a high compression hemispherical polished finish.

kit monté nitro aerox furytech rs10 pro nikasil 50cc

We recommend with this heat RS10 aluminum Group: racing exhaust, lighter drives settings, carburetion in a Ø17,5 with 19mm valves racing, clutch that hangs later than originally cold candle racing long or short pellet pellet with DOPPLER hold, reinforced crankshaft advised but causing little hold on, back to the housing aligned transfer if desired.

zoom culasse rs10 pro nikasil nitro aerox furytech

The pack contains:
X2 clips of piston type G Ø10X1mm
X2 segments Ø40,2mm X 1mm thick
X1 piston Ø40,2mm
X1 piston pin
X1 aluminum cylinder 5 transfers exhaust normal Ø40mm RS10 Pro
X1 cylinder head high compression orange
X1 game engine joints high

intérieur cylindre transferts échappement furytech rs10 pro nikasil nitro aerox

Itself on:

Engine 2 Time minarelli horizontal liquid scooter
2 motor scooter minarelli horizontal air Time Spent liquid (long only)

APRILIA AREA 51 LC
APRILIA GULLIVER 50
Aprilia SR 50 LC NETSCAPER
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH

BENELLI 491 SPORT LC
BENELLI K2 50 LC

BETA ARK 50 LC
BETA EIKON 50 LC

GSP GARELLI 50 LC

ITALJET DREAGSTER 50 LC

MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 LC Phatom
MALAGUTI F12 R LC

MBK MACH G 50 LC
MBK NITRO 50 LC

YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC

And many other models ...

haut moteur rs10 pro nikasil monté nitro aerox minarelli horizontal liquide h2o


Optional we offer a preparation course 1, this preparation is a modification of the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved bottom skirt is also included in the amendment. Allow a little extra time for this preparation!  

Product Details
129.0612
New product
You might also like
16 other products in the same category:

Reference: CIL-723

BARIKIT

Cylinder - piston without cylinder head 50cc Ø40mm BARIKIT cast iron (10mm axis) minarelli horizontal liquid (nitro, aerox, ...)

A little more efficient than the original types like the, this small high engine without cylinder head is ideal for refurbishing your NITRO, AEROX ... By having a small gain in power!

Price €99.99
Shipping in 7 to 12 days depending on arrivals BARIKIT
More
Shipping in 7 to 12 days depending on arrivals BARIKIT